Search results

Hello all, Just finished replacing all the glow plugs and it was a true PITA. Broken tips, No room to work. After all this I tested the box. Light came on for approx 7 sec went out Heard a relay and I still had 24v going to the plugs. I had a meter hooked up to a glow plug. I have a Nartron...

As stated I would look for a grounding issue with the blinker circuit. Mark

If you can find the spare carrier from the M37 you will be all set. I have one and it works great. Mark

Dot 5.1 is pricey and made for high performance brake applications. I use it in a car of mine with AP-Racing 4pot calipers. I would recommend DOT 4 for most uses and as already stated DOT 5 is great stuff but can settle water to the lowest point and rust out lines and is $$$. If you do change...

If you use never seize (I always do on my HMMWV) and if you are not in a marine salt environment it can be acceptable. I just hate rusted fasteners. Steel screws have problems also. A poly or rubber washer to insulate will help.. You do what you can. Mark

If someone walks up to the truck at night the camera sensors it and alerts my phone and when that happens a 200w 20K lumens flood light comes on. I wake up to any alerts like that and look at the phone and if need be I can shoot down the stairs to welcome my uninvited guest and welcome him. As...

It's a deterrent and with Blink cams it's all I can do. Mark

I much much prefer the X-Doors over the soft doors. Security and esthetics are the main benefits of the X-Doors. Shrapnel resistance over the soft doors is a very minor consideration but what the hell. The X-Doors are much quieter than the soft doors for road noise. Prices for X-Doors is...

LOL I replace the stock screws with stainless Phillips so it looks right. HA Mark

An M998 barely fits into a 20' shipping container. You have to pull the side mirrors and if you have them offset antenna mounts. You will be climbing out of the truck. Mark

Might I suggest some 265/75/16 tires and as already mentioned a pair of older chevy,Dodge or Ford 8 lug wheels. I have this setup on my M101A2. Mark

I have had my N/A M998 for five years now and it's great for what it is. Sure I'd more power and an extra gear but she's fine now. These were never meant to be speed demons and if you need to get somewhere faster look elsewhere. I try to keep mine as stock as possible. Just my two cents. Mark

As others have said use a multimeter as the gauge should not be trusted when testing the charging system. Mark

That spare tire carrier I believe comes from the M37 and are impossible to find. What a lot of people do is switch the light bulbs to Leds that will run from 10v to 30v. Brighter lights and the ability to hook up the trailer to 12v or 24v with no concern. A popular auction site has 12 pin...

I run the 24 bolt stock wheels and 37" MTRS. Have been pleased with them. Gave them a quick paint yesterday. Mark

Welcome from Mass. and another ham. Let us know what you find. Mark

https://midwestmilitaryequipment.com/humvee-aftermarket-mirror-adapter-plates-set-of-2/Here you go... Mark

Very impressive. This 3D printing is getting better and better. On another note the proper word for a can of carbonated soft drinks is "Soda" or more properly "Tonic" and certainly not "Pop" Lol You need to look at the 3D adapters to mount an H1 style rear view mirrors on the upper hinges of...

It could be with the turbo kit to use the cold temp curcuit off to keep the timing retarded for the turbo setup. Just a thought. Mark

Hi, The truck and trailer are the same paint. Below is the mix from home depot. Take care, Mark