Search results

Thats how i did it when I discovered my latch not latching after it was in the down position. I notice some one in the military had it apart. so i took mine apart and discovered the spring that latches it after the hydraulic pressure is relived was missing. To get it working again I found a...

So far so good its running ATF DEXIII. I've put about 600 miles on it. the hole was good after running a tap through it.

Whoever is seriously interested, send me a personal message with all your contact information and I'll start putting a list together. Be sure to include what year and what engine yours is.

If 5-10 seriously interested people contact me I could start putting a price on it. Also I would need someone interested close enough to me to bring there FMTV over for a week so I could design build a bracket for the 3116 generator mount.

I don't have any info on the 3700sp, but I do have experience with the MD3070. I own a 2003 M1078A1 with the MD3070 transmission and my original transmission died and in the process of getting a used replacement I found that the MD3070 does have variations mostly with the internal wire harness...

The Plan: Take a readily available Humvee AC kit, Red Dot PN# RD-2-5497-0, NSN:4120-01-581-9451, Contract CAGE: 31UG4 Note: I found my kit at the auction site we all love. and the FMTV Interior AC unit (Evaporator-Heater Assembly) 1st generation Red Dot PN# R-5750-1 Combine them to make...

A very kind guy at Red Dot sent this to me yesterday, a copy of the Gen 1 A/C unit diagram.

A very kind guy at Red Dot sent this to me yesterday. Gen 1 A/C Unit Diagram.

Thanks for the preview. Looks like we are all trying to get them installed before the summer heat, as I just started the process. I have plenty of questions. I have a gen 1 AC evap unit and plan to use a humvee / universal kit for the rest of the components. What are you guys doing for the rest...

Its an ilco X29 key blank.

When performing my transmission swap I turned the engine over both ways from the generator fully nut and by pulling or pushing on the fan. There is an access hole to the fly wheel passenger side, with the cab up facing the engine to the left of the turbo. To gain clear access to the threaded...

Could someone please inform me of the auction site they were sold on? Thanks for the information in advance.

I must be looking at the wrong government auction sites. Could someone please send me a private message with the site they were sold on?

I've been installing those "sensors" for over ten years in the electric gate business I owned. The the part you see in the ground that is commonly rectangular in shape but can be in many shapes is actually just insulated copper wire that makes a loop around that shape multiple times depending on...

That looks perfect, great job I believe I'll be doing the same thing. Thanks for sharing.

Here is a picture of the inside of mine after cleaning the mud out and painting it.

I have lots of experience with both of those items on my A1. That photo you posted of the battery load controller, if bad (mine was) had a trouble light in the dash showing not charging even though mine was charging it also has a small hard to find LED light on the load controller green when...

Please put my name on one each of those brackets. I was in the processes of designing a mount to go on the generator side and adding a V pulley to the generator pulley. Instead of a idler pulley I was going to making the compressor bracket adjustable. But I much rather go with original parts for...

Thanks but I found the design and dimensions in the tech manual.

Here are some picture of the set up on a members 2008 LMTV who was kind enough to go out in the cold and get them for me! Thanks!