Search results

It easiest to remove the whole box. The shaft is on a worm gear.

Up until now everything has matched up. The rr engine matched up perfect with the old holes

In order to illuminate the head lights I cut holes in the buckets and the back of the headlights and inserted a standard outdoor light socket with bulb. Wired it all to out door use cable and installed a photos cell sensor in the line. The photo cell turns the light on at dusk and off at dawn...

Got the front cross member out today. The existing holes in my "new" multi fuel front member don't exactly line up with the existing holes. Did you guy s have to make any mods for the cross member to bolt in other than enlarging the holes?

Back in the summer I put this flagpole and mutt display in my yard. The vehicle itself is an early plain M151. I deemed it not economically restorable and thought this was a good use for it . I finally got around to wiring the head lights on the MUTT this week so they come on at dusk. All...

Is this a real question?

Managed to push the truck inside today. Have removed all of the rivets holding the crossmember in except those under the spring hanger. Jacked up and blocked the truck and dropped the springs today. Hopefully will find time to drive the remaining rivets this week. Next I plan to clean and...

Termites are just part of living in the southeast. Not a big deal if the house is treated and you have a bond with an exterminator and an annual inspection.

Thanks Gerhard. Kenny I will have to check out the Donar truck transfer case. I have not disassembled anything on that truck and do not plan to until the 108 chassis is ready to start accepting the "new" components.

Well I found the answer to my own question about the transfer case. So Kenny or any other other experts will the pto off the back of the transfer case in my 108 that runs the crane bolt up to the air shift case out of the donor?

Made some more progress today. Ben slow going with the rain and logistics. Finally got the cab removed, tool box, battery box and the fuel tank. Also got the tranny out. Will have to remove pto and install on the other tranny. Can someone chime in here. This may be a dumb question but is...

I must be blind I see no price anywhere. For $3000 that truck is a great buy. It weighs 20k pounds.

For me it's not always about the money. I am currently knee deep in the refurbishment of a m108. When done it will be a somewhat unique vehicle that has many uses. Mine ran ok before starting disassembly so l know at least in the collector world the m108 has many advantages over the larger...

I really like my 432

S3 Viking

So what makes a fender an a2 fender?

A few more. Yes it's still 24 volt. I have another guy who said he wanted the motor a few months back when he heard about my swap, If that falls through it will be available .

Made a little more progress today. Got the old motor out. Rocky,my dad, and father in law, all chipped in.

So where does this valve go?

As Kenny mentioned, the double frame is the main reason. these are not just a cargo truck with a body on it .