Search results

I just finished my wood. I used 1x6x12 Yellerwood decking from the Happy Depot. I cut each board in half lengthwise, 1/4 rounded the edges, primed twice with Zinzer exterior and had Ace Hardward match my rattle can Krylon Olive. Aftyer painting with 2 coats, sandblasting and painting all the...

I just did a major PM on the M35 and when I pulled the filter canisters, a previous soldier A left parts out when replacing the filters. George also sent me many pictures as I tried to explain what was missing. To be sure I got all the parts, he sent me the complete primary and secondary...

White Owl Trucks parts is my vendor of choice2cents

I replaced all the wood and hardware on my M35. I used a cutoff wheel and vice grips. I took 3 cutting wheels and about 10 hours to cut them all out, a real royal pain. I used a 6' johnson bar to pry the verticles out, moving down the sides front to back. Heed Jones' words, it's not a Soldier A...

I am spraying my truck with Wally World Krylon Camo Olive. I am planning on spraying over the Herculiner. I tested the right front fender and it seems to be covering and adhering. Not sure how the Rapco would work. A call to Rapco might be the best way to answer that question.:idea:

I took off my antiskid with a 4" grinder with a wire cup attached, then applied Herculiner. I am also doing the steps.2cents

I had a similar problem with loss of power when I had about 3/8 tank of fuel. I have been running diesel with 1 qt of new motor oil with each 20 gallons of diesel. I cleaned the fuel system from the bottom of the tank to the IP, and replaced all the filters. When I pulled the pump I found...

Does anyone have directions on how to use the military M35 steering wheel puler. Mine did not come with instructions.:confused:

CLothes pin is correct; the other 2 look like the spring and retainer/contact for the horn button.2cents

Im in, hopefully so is the deuce!

White Owl has a good price and quick service8)

Since so many of us on SS are owners of Multi-Fuel MVs, and fuel costs constantly rising, I, like many of you, are looking for affordable ways to run alternative fuels. How about a new, current thread for listing the different ways or methods you are using to mix a brew that we could use to help...

:ditto:I don't think I would immerse anything that creates heat in a solution that could contain anything flammable. Those immersion gov't heaters are known for flashing, and they run on gasoline or diesel.

Welcome aboard, good luck opn you trip home. It sounds like you are well prepared.:grd:

Call George at White Owl. I got my 5-ton from him. Great service2cents

Does anyone out there in SS land know of other specific applications for the multi-fuel engine, especially in civilain use, such as tractors, or agricultural vehicles? It is my understanding there were some civilian uses that incorporated power steering, and I need a p/s bracket for my...

I got mine from Harbor Frt

The duece is a winch truck, and is in their shop. It is rough shape though. I want to put in an offer for it for the winch, hardtop and drive line.

No, It's the old Classic Chevrolet on Maitland Blvd and Forest City Road.

We have a Chevy dealer here in the Orlando area displaying one in front of the dealership