Search results

Totally off the subject, but I loathe automatic oilers. In my limited experience, automatic oilers over-oil the equipment and then when moisture makes it in, the overage of oil makes a sloppy, gooey mess which requires the machine to be disassembled and cleaned.

Options and condition. In terms of options, if you want all the "cool guy" stuff like winches, dropside beds, heaters, etc., it's better off to just buy a truck with all of that versus buying a stripper and adding it. In terms of condition, there is damage, corrosion and driveability. Good...

This is the most hilarious thing I have ever read about MV's. I think this is better than the guy who was positive we had taken Jeep's to the moon.

So were you using the 939 series when you were in, or were you using the earlier 809/39 series 5 tons? Welcome to the site!

Very nice.

That's the bleeder. Everything you could ever want to know is linked at the following post: http://www.steelsoldiers.com/showthread.php?87592-Where-to-put-oil-on-air-pack&p=1123813&viewfull=1#post1123813 If you click there, you'll see links to thread discussing what to use to lube them, the...

I love the archive argument. It's my favorite. Covered extensively here: http://www.steelsoldiers.com/showthread.php?88381-searches-and-tm-s&p=1133429&viewfull=1#post1133429

There's a guy on eBay with the bolts, look up the MS # in the TM and search eBay for it. Supposedly Coker is making or is going to make the correct tires, there's a big thread on g503 about it. I think they will be able to be ordered through Summit Racing as well.

1. Inner seal for either a deuce or 5 ton. Probably deuce. Can be seen here: http://www.steelsoldiers.com/showthread.php?8460-Front-axle-seals-and-boots-stepXstep&p=75920&viewfull=1#post75920 They're the same front and rear. 2. Believe those are front inner axle seals. They should have a...

Sure, let's give it a shot. Remember the value of free advice given on the internet....................... no refunds if we're wrong. rofl. When you post the pics, see if any #'s are on the seals and post them as well. I've never had to turn a drum. I had one truck that needed the drums...

If that were my truck, I'd be doing the following: Pull all 6 drum/hub assemblies and: Clean and inspect entire area (shoes, hardware, etc.) Inspect wheel cylinders for leakage at a minimum, rebuild/replace if you are picky or don't want to go back in for a long time. Inspect flexible brake...

http://www.steelsoldiers.com/showthread.php?59917-How-to-post-pictures-a-tutorial&p=1295196&viewfull=1#post1295196

I'd prefer email, you want some degree of "cya"-with email, you have some degree of proof. Here's the thing-I think if you call them and ask them to email you the relevant codes, you'll never hear back from them. You have to deal with the following municipalities: State County City And...

That's M939 series specific. M39, M44 and M809 are what everyone else is posting.

You'll end up cutting out the entire rocker panel and you'll end up having to do the area of the lower cowl (where the fender meets the cab). When you remove the fender to do this, you'll destroy the two captured nuts inside the rocker, so you'll be fixing them while you're in there as well...

Man, this is a lot of ground to cover. First, the issue with current vehicles not being released (MRAP, HMMWV, etc.) are only part of the problem. I would like to see those restricted vehicles made available to the public, but I'm not going to waste any time or energy trying to make it happen...

http://www.steelsoldiers.com/showthread.php?105813-Adding-a-turbo-question http://www.steelsoldiers.com/showthread.php?2709-Adding-a-Turbo-to-Non-Turbo-465 http://www.steelsoldiers.com/showthread.php?47733-Converting-M35A2-non-turbo-into-Turbo Try those as a start.

Dawn loves the open cab Dodge. I keep showing her pictures of DUKWs and Jeeps and she keeps showing me pic of open cab Dodges.

That's an epic turnout! Clintogf is so jealous of Mahala now. rofl

Alright, it's time for another installment of search help. Who is looking for something that can't find it? Post up what you're after and I'll find it and I'll explain how I found it. I'll be back later tonight, after dinner.