• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Lost Fast Idle Function When Cold/Thermostat Replacement Issues

    I haven't had very good luck with Borg Warner or Standard electric switches or parts myself.
  2. R

    NP241 Transfer Case

    I have run several 205 transfer cases. Both 4 speeds and 400 automatics. They all shift out of 4 high best by going forward then let off gas and shift to 2 high. To shift out of 4 low stop, put transmission in neutral, then shift to 2 high. If an auto doesn't shift all the way from 4 low to 2...
  3. R

    The starter is the weak link!

    What starter did the GM dealer install?
  4. R

    Artisan's M916

    Biodiesel does not store well at all. It attracts moisture and breaks down in storage.
  5. R

    Artisan's M916

    Brad are you filling up with biodiesel?
  6. R

    What have you done to your CUCV today/lately - Part 2

    I add Power Service diesel additive every time I fill up year around. I use winter formula in the cold months to prevent gelling. Good for the injection pump and injectors both. Also runs a little quiter.
  7. R

    Not your regular Bobbed 6x6

    I do know the short WB ones are a lot harder on U joints!
  8. R

    Headlight Woes

    Check the grounds at all the light bulbs.
  9. R

    1986 chevy cucv m1008

    Find an original AC Delco 24v starter and have it rebuilt with 12v parts. Be sure to install new bolts and front brace.
  10. R

    To tow or not to tow that is the question! Peterbilt w/MV tow bar 6x6 cornbinder

    Is it a PRO-TOTE?
  11. R

    Steel Soldiers giveaway sponsored by CTC Surplus Tires

    In
  12. R

    Rear wheels hop when in snow

    Try not having the same tire psi in front and back. Try more and less in each and see if it helps!
  13. R

    M1008 - electric setup/glow plugs/loose cable

    Those terminals with the little 2 screws clamp to bare cable ends are just a bandaid fix in an emergency. Those screws can strip threads and not make good contact. There is not complete cable contact with those type clamps to start with. They are like a loose nut on any cable connection. Next...
  14. R

    M1008 - electric setup/glow plugs/loose cable

    I also see a lot of problems with battery cables and connections! I would change all of them FIRST!
  15. R

    CUCV in Alaska

    Shoot it right handed then shoot it left handed and then you can clap with your shoulder blades!:LOL:
  16. R

    Turned away from camp grounds??

    Many Oklahoman's don't see any humor in this.
  17. R

    CUCV in Alaska

    Kerosene is the same as number 1 diesel. It is a little bit lighter weight than number 2 diesel. It also has a slightly lower btu rating. Kerosene is also called coal oil and is used in coal oil lamps.
  18. R

    I just don’t know, how do I get back to the original thread,

    Yeah I already had half a pot!
  19. R

    I just don’t know, how do I get back to the original thread,

    My watch button appears in the top right of the first post of the thread.
  20. R

    Possible wiper switch issue

    Dielectric grease is your friend on all these harness connections after cleaning them up real good!
110,926members
165,350threads
2,326,628posts
1,265online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks