Search results

We have several from a "parts" unit to NIB. give me a call 800-648-7687. I now have access for the cable ends on the controller so you can make a cable as long as needed. ernie

Dave maples is transporting a LMTV and trailer from Bragg to Augusta Ga. next monday. He might be able to make the haul for you. 865-250-9494

I am looking to put a 3500sp trans and 3116 cat in my Ford f350 dually. Can anybody give me the info need to wire the trans and controller in? I have a parts truck (S&S) doner, but no cab wiring or parts. Is this a worth while project or should I use a Manual shift set up. My icon is the...

Starter bumping in and out is low battery voltage,

For shipping on the South East area.. I use MAPLES ENTERPRISES, DAVID MAPLES is out of Friendsville tn 865-250-9494. If he does not answer leave a mssg. Dave does a GREAT job. Self employed, uses a Dually and 40 foot flat trailer. He hauled 2 LMTV from Ft. Bragg to Augusta ga one 1 load...

I have some allision 3500sp trans and converters new on skids. I you want to go that way. I sell these to heavy load dump trucks. ernie

If you replace the trans, I would like to get the old trans and converter from you.. Ernie

I do believe your work area is going to be a little "tight". lol Congrats. Ernie

right around the corner..... If in the area ... stop by. ernie

Welcome from North Augusta sc...

Here is a pic of the tool. Works GREAT!!! Works on all of the GM's and Ford glo plugs.. ernie

Sorry... the plugs MUST be unscrewed from the head and this will pull them out of the head. If they are the same size as the 6.2 series.. ernie

I have a glow plug removal tool I made. It will pull the glow plugs in less than 5 minutes each, no matter how swollen. If you need to borrow it let me know and I will send it to you. Do not fight the plugs... This tool is a MUST. Ernie Socom mfg 10375 Atomic rd N.Augusta SC 29841 800-648-7687

Ypu can "can" the air pods and pull the trailer with any vehicle. Look at the air pods, on the top is a rubber plug. Remove plug and insert the canning bolts, tighten the nut on the bolt and it will release the brakes. ernie

Just because the relay "clacks" does NOT mean the contacts are making and allowing elec to pass. Try jumping across the relay load points. I have found a pile of 'BAD" relays... This is a easy check.. ernie

They are worthless. The system is military only.

Most of those used a double side tape. VERY strong. Take a heat gun and heat up the plastic area, Use aluminum foil to protect the paint. As the plastic gets hot, it will soften and you can remove it in sections. (Don't get in a hurry) Any sticky tape left... put mayonnaise on it and let it...

Works via satellite also...

That, my friend , is a holder for the new scanning inventory system that is in use today. Complete track of ALL vehicles and equipment, anywhere any time. We had a pile of the units on equipment we purchased. Ernie

I am located outside of Augusta GA