Search results

Yep, I’ll be running 10gauge 4 wire to the L14-30 plug. Since. I’ll be disconnecting the bonding strap since the unit will be connected to panel ground. Sent from my iPhone using Tapatalk

Lol love the appliance load bank strategy [emoji106][emoji23] Sent from my iPhone using Tapatalk

Have a pn#? Id spend 27$ Sent from my iPhone using Tapatalk

It might need a hard start capacitor to reduce the starting current. Sent from my iPhone using Tapatalk

Ran the generator for 2 hours yesterday. No apparent leaking over the injector area anymore. Sent from my iPhone using Tapatalk

802a was reset in 2010. Fuse modification was done but not the MOV. Ordered a few... Sent from my iPhone using Tapatalk

Sorry for the old thread activation. I also need a replacement FU1 fuse. Found a few on an auction site.... Sent from my iPhone using Tapatalk

One of the high pressure lines was not fully tightened. I’ll evaluate if the flares are cracked on next startup. Sent from my iPhone using Tapatalk

Looks like the high pressure lines not the return. Degreased and lightly pressure washed. Retightened the high pressure line fittings. Sent from my iPhone using Tapatalk

Looks like there is an external diesel leak originating from the injectors. Lines look ok, no leaks. Are there o-rings or other serviceable seals? Sent from my iPhone using Tapatalk

Sharing progress on my project to connect a MEP-802a to the home for backup power. Infamous well nut fix. Recommend starting with this first. My genset worked great however leaked after a few weeks. Electrical panel interlock installed. This required adjusting position of all breakers a...

+1 Sent from my iPhone using Tapatalk

Wow [emoji33] That’s expensive for what it is.... Sent from my iPhone using Tapatalk

Anyone out there find a source for canvas/synthetic covers? Easy enough to make with a commercial sewing machine (which I don’t have) https://transhield-usa.com/product/navy-5kw-mep-802a-generator-cover/ Transhield may have one... Sent from my iPhone using Tapatalk

Interested in a similar setup. I’ve been debating installing a Nema plug for a typical portable generator to an interlock breaker feed at the panel. Sent from my iPhone using Tapatalk

Love the turnbuckle tensioner mod Sent from my iPhone using Tapatalk

Finally reassembling the covers. Does the TM show what screws go where? Sent from my iPad using Tapatalk

Just ordered some hardware for replacement, great thread. Thanks.

I should take the time to relieve the sheet metal before re-installation. Sent from my iPhone using Tapatalk

Replaced both drain and return wellnuts on 802A today. The return was easy to access and fish though with a wire. The drain was not feasible to tighten due to interference with the sheet metal. I had to completely remove the radiator and supporting structure to R&R the tank. This was a huge...