Search results

Old thread but very nice summary and discussion. I’m planning on installing an 802/803 for my home this year. Sent from my iPhone using Tapatalk

There are some excellent bearing race removal/installation tools available from Harbor freight and other sources. Else if you can get a clear shot but the flat part of the radius that overhangs the machine tub you can tap on it gently and carefully with the soft tools such as a piece of brass...

Replaced throttle pedal bushings. Adjusted throttle cable - wow what a difference. The cable is significantly stretched and needs replacement. It’s nice to have nearly full power now. Finished paracord wrap of steering wheel. After testing out a few different patterns I chose a basic round...

Noticed the same flexing. Easy enough to add a reinforcing plate to spread the load Sent from my iPhone using Tapatalk

What did you use to cover the center tunnel? Sent from my iPhone using Tapatalk

Window weatherstrip for HMMWV X doors https://r.tapatalk.com/shareLink?share_fid=57846&share_tid=242623&url=https%3A%2F%2Fforums%2Eg503%2Ecom%2Fviewtopic%2Ephp%3Ft%3D242623&share_type=t Sent from my iPhone using Tapatalk

New CDR valve and hose Measured sound levels in the 998. Running 94dbm ish @55 MPH. Sent from my iPhone using Tapatalk

What process/products did you use for the floor/firewall? Sent from my iPhone using Tapatalk

Cant find TSB for power steering pump cap vent line routing. The 998 has a provision for a vent line. The line is missing on my rig. Sent from my iPhone using Tapatalk

Finished installing LED side marker lights. Purchased from Macmors @ebay Sent from my iPhone using Tapatalk

Great thread. Really considering picking up a MEP-802 or MEP-803 as a standby generator for the house if I can pick up a decent running unit at local auction. Sent from my iPhone using Tapatalk

Old thread I know. Picked up a Pow'r Gard 30D36R on auction with 50hrs on it. Started right up! Need replacement key/switch. It’s broken off in the run position. Need a replacement battery but have not found a model #/spec to cross reference. Need a wheel kit. Baldor serms to have...

Same behavior on my HMMWV. Will follow TSB to test-adjust kickdown switch. Sent from my iPhone using Tapatalk

I have the 4 man Plan B hard top. Nice quality product. It has been challenging to get an effective rain seal on the rear panel to the bed though. Sent from my iPhone using Tapatalk

I have an 8274 winch in good running order. Curious if anyone has successfully adapted one to the HMMWV. If so, I might consider the 24V motor/solenoid conversion and give it a go. Sent from my iPhone using Tapatalk

Replaced CDR breather tube, PO used an incorrect hose that collapsed under vacuum. Re-sealed Plan B 4 man rear panel. Drilled (6) 10-32 retaining screws at the bottom of the panel to keep vibration/movement from blowing out the seal. Sent from my iPhone using Tapatalk

Hope this passes. Sent from my iPhone using Tapatalk

Watch for water leaks under the A pillar near your cig outlets. I’ve seen the panel glue leak there Sent from my iPhone using Tapatalk

All ears on 700R durability.... Sent from my iPhone using Tapatalk

Fabricated full length x door hinge reinforcements. Adds some additional torsional rigidity to the doors in this area. Still way too much flex in the door structure for my sensibilities. Shimmed the window rollers a tad with washers to take up some of the free play left/right and associated...