Search results

Rick Larson sells the decals to refresh bridge plates and numerals.

Have the hummer / hmmwv rims been reworked? Red flags as those are 16.5 rims not 16!!!!!!!!

I believe that is a jic flare fitting. No o ring. I would unscrew, make sure interior fitting is clean with no dirt/paint and reassemble. That is reusable field fitting that can be disassembled and rubber hose replaced.

My go to when chasing this type of leak is a can of spray degreaser such as gunk to hose down the area to remove dirt and oil/grease so the fresh stuff stands out clearly. Also makes the repair slightly easier as you will hopefully stay cleaner .. :cool:

another solution if just needing a USB cable(s) that works well on HMMWV and not in the way is a field plug to the slave cable port. I have used this solution and very happy with it. Veteran owned company, btw https://fieldplug.com/

next to the B pillar Check out this AMG kit 57k4428 from a fellow member on ss but he is not here often. Pricey but if you want the real deal...

unofficial name is "exhaust donought" or technical name is exhaust flange gasket. I ordered mine from kascar as it looked civy but I could not find the correct one aftermarket.

The pitman arm puller for sure is available as a rental tool at no cost at Autozone and O'reilly's.

Rifle mounts do not mount there.

That is typically a mil spec dow 738 sealer or equivalent.

Congrads on back in the saddle:tank: We need more pics of the bed set up and details

Pop an old one out. What is the stamping on the head? Usually letters/numbers. Axles are dexter. Studs are common at a trailer parts place like e trailer/croft or old school real parts store like Napa. Earlier reference to a double threaded stud was some odd ball hub or most likely a Bubba...

As stated, Believe they are hydraulic not gas. Drill small hole and drain. Pump cyl and collapse several times to get internal oil out. Tobash, He is across the pond.... in Germany.

Those sound like grote.

Military train derailed recently and some cool vintage footage. Is that a 5 ton high railer in the yard?

My understanding is that depending on which regulator is on the 200 amp, the wiring is different. Search on here as there has been threads on it.

@Gimpyrob used to have sides and gates for the m101's. Might be worth a shout out.....

Yes, it is common. the piston will stick. There is a lower rebuild kit. Clean and hone bore plus lube the o ring. Many have also replaced with a more modern design. Plenty of choices out there in the civy world. Ours does have a 24v heater so I don't know the weather in your parts so that could...

Thanks for the info. I thought it was a m101 prototype of some sort. He did a good fab job!

What model trailer is that?