Search results

I thought MV's had to have "50 foot" paint jobs, IE the closest the paint job looks good is 50' away. Any closer, and runs start to show up.....

Only thing I see is the 12 volt conversion. Air cleaner may be sitting in the cab, for all we know. I would have to see more pics of the cab, body, tires, etc before passing judgement. I know I paid 2250 for a good running truck with bed rust issues. ****, the brake system on mine has set me...

I believe you can be 180 out. Need to find TDC on #1, and then time the dist so that it is on #1 Plug wire

Get out the TM, and retime the dist. to the engine.

Adam won't care. He drinks diesel, and poops soot.

Why bother? All a CUCV is good for is to use as a wheel chock on a 5 ton. Don't need nice paint for that !!!:naner:

It runs right? Then it is wired. Troy and Tony can ride on the fenders with Maglights when it gets dark, and flash them when required to make turns. Put an old fashioned bulb horn on the WC, and there ya' go...........

SC is nice also........

In SC, as long as you have ins, you can drive on a bill of sale for 10 days..........

Man, that will take a lot of ping pong balls.........

Cool.........Just what I need is another hole in the water in which to pour money,,,,,,,,,

Just make sure you install them correctly. The wider flange goes INSIDE the glad hand. They are made out of a slick plastic, and the seals wear and seal better then the old rubber ones.

Just remember- those seats were sized for an 18-25 year old adult that was in tip top shape. Just be careful putting the IFS in the seat, as he may not get back out again without help.........

Is the M37 24 volt or 12? The 24 volt system won't work on anything but a 24 volt system. If you used a 12 volt condensor on a 24 volt system, it won't run long, if at all.

The trailers are towed by the USS Stump, DDTT 403(destroyer dump, trailer towing) The Navy places old fuel polishing units on the flatbeds. Sorry Ferro........

A 5 ton is the last thing you want to tow a boat. If you thought feeding the 350 was tough- try a 5 ton. The best you will get will be 7 mpg, whether you are towing the boat, or running bobtail. The other issue is turning radius. I don't know about PA, but down here in SC, there are very very...

Is your needle valve on the float seating correctly? It is located right where the gas line enters the carb.

Using a M37 in this day and age as an brush truck is foolish IMHO. While the M37's are rugged, it is getting harder and harder to find parts. Plus, you can purchase off the shelf pick up trucks that will do the same job faster and safer.

I bet the the sensor/gauge is bad. Get it warm, and drop some water on the top of the radiator- if the water droplets boil, then you know that the top of the radiator is at least 212ºf. Does the engine smell hot? Pull the dip stick, and sniff the oil- over hot oil has a smell all it's own.

Nice job. Care to come to SC, and bend the MC vent line on my M37? Please?