Search results

Well, this is what I've been hoping for, lots of response and ideas on an important part of Deuce maintainence. And thank you Banshee for doing that great write up and pictures on the procedure. I should take more pictures for these kinds of things. JT

I took an M35A2 in last week to replace a leaking front axle inner seal for a friend. This is a more time consuming and more difficult job than the rear wheel seals in my opinion. We were figuring that since we don't have the military long finger internal seal puller, we would use our slide...

The thread started out as being about the 20 minute installation of my AVM free wheeling hubs for M35s. It has moved to an appearance comparison with the inside side of Ouverson hubs. I would much rather do a performance comparison test of the hubs in the physical world of trails and sand and...

This is the one I'm going to install on my M109A3 for the Oregon trip this summer. I will let it extend a little higher than stock to help with the noise, the box is up there anyway. Thanks OD Coyote and Will Wagner. When we put our heads together we win. JT out

Jack is a NY-Penn member since way back and has a beautiful collection of Vietnam era US military vehicles. His M123 10 ton tractor and M172 trailer are his pride and joy toters for the M41 Walker Bulldog. We are fortunate to have another NY-Penn member, Jack Pollard who also has an M41 Walker...

You can get the batteries, 6T MF for www.sprucemtsurplus.com for $85 each, new dry charged, maintainence free. This is the real deal. JT out

I'm working on getting the high output IP head to fit on one of my M35 injector pumps. It's at the diesel shop now. If it works out, I will have the ability to have fresh pumps for more trucks. I don't know where to buy the correct IP heads,that is why I am adapting the HO head on. Could also...

RE: Re: Lodging for Jim Thorpe Show No.2 Diesel, I'll be at Jim Thorpe with my oil filter adaptors, lockout hubs for the M35 and I can bring doors and a hardtop with me if you want them. I have new Fiberglass hardtops and a used steel hardtop. The doors are rust free take offs or you can have...

Yeah, High Gloss Semi Gloss. VERY neat Jeep, I'll have to come down again to see it when there's goodies for me. And the ESP Electric wipers are installed and work primo. Ready for Oregon '08 JT out

Lee, when I was in Delta in 1974, we used DN400 in the oil pan, plugged in at night and still lit a pan of oil under the engine an hour before we left for work every day. 40 Below? Heck, we had to work until it hit 58 Below, then the choppers couldn't fly and we had to knock off or camp out...

RE: Whoa! Welcome to Steel Soldiers, Reodor. Thanks for the pictures, The "Tilt" bar is something most of us should do. That's the first time I've seen all the air locker switches, I've been told about them but never saw them. I wish we had more of them in America. Sarafan used to get them all...

RE: Re: RE: m35 with rear winch ever been done ? Welcome to Steel Soldiers, TomB. That winch setup is worth more to the power wagon/ M37 guys than it will be to you. The odd pattern PTO is not that easy to find so maybe you could do some trading to a PW jockey. Just a thought. Our deuce winch...

Hello all, our departure date is July 31 2008 at 08.00 hrs Altamont NY, picking up additional vehicles as we move westward through central NY on US Rt. 20. We will stop at Jack Gregory's to see all the NY-Penn members in that part of the state and check trucks over. We hope to make Buffalo the...

AP Bloom of Interagency Motorpool on Shelter Island, NY began work on the axle disconnect several years ago. His principal was just as it is done on cars towed by motorhomes. It is doable, it takes research and development dollars and he didn't pursue it for lack of faith that anyone would buy...

www.Adirondackdodgeparts.com has the new windshields complete and the metal wiper motors and a lot of other new stuff. He's been around a long time and is easy to deal with. His name is Fred 1 315 896 2572. Regular ad in MV Magazine.

I have been saving my old batteries for a couple years now, just waiting to hear more about the longevity of our used batteries that have been treated with the EDTA cleansing solution and recharged with new acid. Anyone out there with some feedback on how it has worked out for you? Thank you, JT...

Lockout pictures all shiny Here is a photo of my hubs just out of the box

Maybe a new company will get the auction contract this time around.

5 Ton Puller did the propane trick a long while ago on an M543A2 wrecker. Now, all us that own one know that they are way under powered for road driving and could use at least another gear in the main box, Puller's set up gives him the extra gear and then some. It's been a couple of years now...

Andy's turbo picture looks just like the turbo on my later model LDS-427-2 Hypercycle. Mine is not waste gated. JT out