Search results

Ah, It is clear. We have a certified DOD contractor to gov't spec! :-) :beer::funny:[thumbzup]

I knew I liked ya for a reason :-)

Thanks for your service! Welcome to the madness! Roll Tide, Hugh? Go Tigers! (LSU) ;-)

Welcome to the madness. Read this post. Will explain in lots of detail the La saga and resolution https://www.steelsoldiers.com/showthread.php?177697-LOUISIANA-PROPOSED-NEW-LAW-HB-549-Provides-for-Military-Surplus-Motor-Vehicles Hang tight till Jan and you will be good to go. Change your...

It is :-) https://www.steelsoldiers.com/showthread.php?163769-Military-Wire-ID-tag-master-code-list

The block is more specialized. Eaton/ Weatherhead/ Edelmann brass fittings would be the manufacturers to check. Croft might also carry the OE from Mendenhall who makes the surge unit. I only linked to O'reillys but I am sure Raybestos Catalog ( Supplies NAPA and most of the aftermarket) or web...

Napa or any real parts store. These are common items for brake hoses typically on calipers as each side uses 2 . They do not have to be exact. As long as the banjo bolt passes through and the sealing surface contacts the ridges you can have some variance...

There is a member in the classifieds with a bunch of T-filters, not sure if gasket included. A Florida member, PJ but can't recall handle had a ton of nos military fuel filters which are dinosaurs as not a common filter and pricey to boot. Oil filters can be very cheap for common replacement...

Till Scar59 can get restocked, if you are in need check B -line. I checked with Josh and pricing is $85 plus shipping. No connection on my part but when I got my m923, they were the cheapest around. Looks like inflation and metal pricing had driven the cost up! Oil filter is extremely common...

This a great tip as the bulbs have dual elements just like your civy car.

I had to remove the left caliper to reverse the control arm bolt as it was a tight fit. Which winch mount are you using? First style mile marker cradle with built in face plate or the later model separate flat face plate? I made a mistake installing the cradle style as I had the mm specific...

I won't be able to make it as got sidelined with house project.

My experience with different coatings over carc has been mostly a toss up. I have used Behr latex paint, rattle can from krylon, Rust O leum, and others. It will initially stick but if there is bare patches of metal, the carc will start to lift at the edges with the other type of paint. In...

That sounds good to me. I just wanted to get an idea so I can plan😃

Jeff has armour 😃 Where and what time is everyone meeting to cruise together as I am thinking of it?

This is my opinion only. YMMV I don't think they are interested in pursing this matter any more as the new law clears the legal hurdles in their mind to the whole question. The original revoked vehicles will have a clear path to re register & New Registrations will be allowed in Jan. For those...

A friend with the La National Guard also contacted me last week with the same info/warning on the goodyears as he was not sure which tires I was running. Very interesting to see the Wisc memo also condemning the rims and drawing no distinction as to what type, 12 bolt or 24 bolt D & E. Sounds...

Yes, engine swap still makes it the same model. M998 no winch M1038 with front winch.

The standard front and rear calipers is a different animal than the parking brake caliper. You will need to find a mil spec or h1 hummer early style parking brake caliper.Epay has new ones available from several vendors complete with pads in the $170 range 2530-01-174-7441 NSN 5590667 AM GENERAL

A local member gave me a set of the rear tailgate brackets. I took the part numbers and ran a search. They came back as part of a rear combat id panel kit for a hmmwv.