Search results

On GL it is usually taken from your CC automatically unless you have made other payment plans with them for wire payment for high dollar lots, tax on where it is. On Gov Planet you have to call .

Have you read this thread? http://www.steelsoldiers.com/showthread.php?144903-EESS-PCB-replacement-for-the-HMMWV

Yep same EUC but if you haven't done one in the last year it may take a while to get through. Please let the site host your pictures as the link will die in the future.

How is the trip going, west of the Mississippi yet?

Duh, I am pretty sure the "passengers side" should have been the big clue! It was my former Army training kicking in, BO drive light = BO Light , BO marker= BO guide, light or cat's eye. Anyways did you end up putting an LED BO drive light on it, I got some for my MV's at GA last fall as they...

Where and what brand of paint did you get as it looks like FS 24086 which would be a semi-gloss. If was an old gallon, was it mixed well, if not the "flatners" stick to the bottom of the can and cause that.

Pretty sure he is running one of the newer LED BO lights and just looks painted over. Btw where did you wire the IR to?

Picture of what you have? M37 should look like these and if they do but narrower then I would say M38 or 38A1. I have known folks in the past that heated and "squashed" 37 shackles to fit the Jeeps. M37 M38 &A1

If you are using the GE 4454 12V 60/60W then it is 3 lug light. The left lug is the ground when looking at back of bulb, top low beam, right high You just have to remember which of the two lugs on the outside goes to the high beam. Make sure you mount them with the stud pointing down the...

Midwest military, or Vintage Power Wagon are 2 off the top of my head.

From what I have seen the EUC is not needed for a FMTV only certain MV's and HMMWV's. Which is good as the EUC can take months to be approved and needs to be filled out and sent in as soon as auction is over. Time for removable starts after EUC is approved, or in non EUC after receipt of...

If you are buying from Government Planet it can take months for your EUC paper work to go through after you win. You can't get your HMMWV it till it does, but the money goes as soon as auction it over. They can come with an off road title that you have to pay extra for and have to wait till...

Same way you do it on a Deuce Tom, they have the same doors ,that is if you are talking about the Cab. http://www.steelsoldiers.com/showthread.php?12636-How-to-fix-inop-outside-door-handles&highlight=dorr+latch

The kit is in the classifieds, http://www.steelsoldiers.com/showthread.php?149754-Beacon-Light-Assembly-%28Amber%29

Sent my money in today, same spots as last year, over by Kip and Gimp in the opened sided building.

Since it appears to be a Bubbafied re-wield I would go between 1500 and 2K if it looked good in person, if it was a straight re-wield another 1,000 or so, if it had been a no wield/ no Bubba stock in the condition it appears to be in up to 5K maybe. 2cents

A couple of side shots that show the whole jeep from front to back, data plates if there are any, they would be on drivers side. Maybe some uncluttered views of the divider wall behind the front seats and a full rear shot. Plus a under the hood shot, saw a ford prototype once that looked normal...

The Fed stock # you posted is for a standard M151 MV, there should be a data plate to the left of the steering column. If it is there it would also let you know who built this one. Yes, everything from behind the seats, body wise is custom.

Nope not a 718, the added 18" on a 718 is bolted on to a normal 151 and whatever you got is way different. Whoever modified this early model body was a master metal worker as it looks factory and may be some prototype. If it is you would have a very rare Jeep, can't wait to see what the...

No new Dodges in the last 2.5 years?