Search results

I was headed to the DMV of all places to renew my license which was to expire that day. Truck started up perfectly as usual, then I went to put it in drive and I heard the lovely sound of a screw making its way down the inside of the stearing column and the shift indicator failing to move. Panic...

Some one posted this a while ago but I lost the link to the poster. Default CUCV Fuse Box Layout There are some errors in the TM diagram for the CUCV fusebox. I will attempt to point them out as I find them Here is a "clean" fuse box with all the proper fuses and labels...

I also need the data for the bleed screws on the air pack which is listed as such: PAOZZ 2530-294-6747 SCREW,BLEEDER: BODY ASSEMBLY EA 2 * * * * 108 2 AND CYLINDER CAP 7376729(19207) I don't think they are the same size as the brake cylinders. Thanks for any help!

Here is the entry from the TM: 2530-274-4510 SCREW,MACHINE: BLEEDER A EA 1 * * * * 107 4 7409322(19207) I want to put speed bleeders on my truck. Thanks for any help!

Does anyone know the trick to removing the glass without breaking things? Thanks!

Found this substitute for the gromet and it seems to fit reasonably well. from McMaster-carr You may be able to get them cheaper elsewhere, but at least you have the specs here. It is not an exact match but I could not finf an exact match out on the web, 9600K96 SBR Rubber Push-In Grommet for...

I am looking for a gasket that goes between the rear light assembly and the lens. Any help with this is much appreciated. this is for a M1008.

I need to extract a glow plug on my M1008. A while ago I did something stupid. I was changing out my glow plugs and became disoriented and instead of unscrewing the glow plug I ended up overtightening it to the point where the top portion snaped off. I will be extracting it and I wanted to...

I'm trying to figure out if the frame extensions for the M939 are identical to the M39 series and fit the M54A2. Thanks for any pointers.

Has any one mounted a pintle hook on the front of their M1008?

Hi All, I am looking for detail drawings of the M1008 body. In particular, the passenger side rear bottom corner. I have a couple of holes within inches of that corner and I suspect some cancer in the bottom of the corner starting soon. I will be patching the holes soon, but before that I...

I have an M1008 as well as two other MVs so I want to be able to jump my other MVs with my CUCV and visa versa. I also like the idea of feeding my glow plugs from the 12 volt bus to avoid possible problems with cascade. My idea is to use a single pole double throw knife switch to switch...

Is any one familiar with these epoxy systems? I bought a bunch of stuff a while back from a contractor who was going out of business. One of the items was a hand held dual cartridge gun used with the Simpson epoxy system for imbeding rebar and threaded rod into existing concrete. My question is...

I am asking this question because I see new folks saying they have been going 75 mph for 60 miles on the freeway. This is fine for a typical car nowadays, but I am under the impression that that speed puts you over the rpm limit. I would hate to see new members put in a lot of work on there...

Preserving some info on an old, but interesting system. ================================== The U. S. Air Force Tactical Air Control System Control and Reporting Center (CRC), designated the AN/TSQ-91; Tactical Air Control Systems Operations Center Under the Project 407L Tactical Air Control...

A long time ago I rescued this truck from the scraper. I put some money and time into it to where I could get it registered in California as a historical vehicle. Essentially I rewired it with a harness I got for another truck and used new connectors, etc. Replaced a lot of parts. I replaced...

This is for the M1008 Could someone pleas help me figure out what to do or point me to the right part of the TM that deals with this. I just lightly tap on the brakes and I end up burning rubber. This is at very slow speeds. Less than 5 mph. Once it is running for a while it clears up a...

Just an FYI. In a former life I did a lot of wiring and one of the products I came accross was this shrink tubing that had adheasive inside. The product is made by 3M and I can vouch for this stuff. Besides the obvious use for wiring, it can be used to do things like insulate the shank of a...

I am desperately trying to get my XM211 out of storage and home so I don't have to scrap her. I got her running again and she runs just fine, but the batteries are in bad shape. If I slave start her and then pull the slave connection she dies.. I am trying to figure out if it is just the bad...