• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2018 Georgia Military Vehicle Rally buy-sell-trade

gimpyrobb

dumpsterlandingfromorbit!
27,786
752
113
Location
Cincy Ohio
Bringing some plastic water cans, 5 ton snatch block, some chains a tow light 2 officers mess kits a kit to install ac comp to a 8.3 as well as the compressor itself i also have a 100 ft generator cord came off a m750 , hub and axle for a duece, a oil cooler for 818, a 8.3 engine shipping container
Tim, do you have the spool that cable came off of available? I think they are sometimes in an aluminum box. Id be interested if available
 

glcaines

Well-known member
3,911
2,585
113
Location
Hiawassee, Georgia
For Sale
M35A2/A3 passenger door, NOS?, complete, camo, $175.00 Sold to Floridianson
Snatch Block, NOS, 10-ton, looks brand new, $175.00
Armor, Turret, Mount needs to be re-welded on, $200.00
Tow Bar, Medium, W/3/4 and 1" feet and axle clamps, Excellent condition, $550.00
Wheel, M35A3, no valve stem $125.00 Sold to Matt444
Beadlock, M35A3 $25.00 Sold to Matt 444
Cab Reinforcement Plate, NOS, $150.00 Sold to Setoyota
Assault Rifle Scabbard, MOLLE, New $30.00 Sold to Juanprado to be picked up by Timntrucks or Dockrocker
Oil Cooler for M35A2 Multifuel, Including all gaskets and o-rings NOS $250.00
ATV Wagon by Bosski with bedliner (New cost is ~$2000.00) $750.00
U-Bolts for M66 Gun Ring Posts for M35A2/A3, 4", NOS $50.00
U-Bolts for M66 Gun Ring Posts for Armored Vehicles, 6", Used $25.00

NEED
Fender, M35A2/A3, NOS
M35A3 CTIS Wheel Valve Stem
M35A3 Passenger side mirror mount


Here are photos from the actual trailer. The trailer has electric brakes and an electrically actuated dump bed. You would have to wire up the controller, which is included, for the electric brakes and dump function. I'm going to bring the trailer to the GA Rally along with an ATV so you can see it being pulled.
 

Attachments

Last edited:

profo

Active member
428
73
28
Location
jeanerette,la
For FMTV and LMTV, front and rear brakes. New takeoff drums and complete backing plates. For 2 backing plates $100.00, complete with drums $150.00 for front or rear. I will only bring these if asked to.
Steve I will probably take a set of backin plates I need some spare brake canisters!

marty
 

microjeep

In Memorial
In Memorial
850
468
63
Location
blairsville ga.
Looking for a couple of either hard tops or soft tops with bows for M35's preferred green soft top but will consider tan. Please p.m. If you have any of these. Thanks Micro
 

glcaines

Well-known member
3,911
2,585
113
Location
Hiawassee, Georgia
For Sale
M35A2/A3 passenger door, NOS?, complete, camo, $175.00 Sold to Floridianson
Snatch Block, NOS, 10-ton, looks brand new, $175.00
Armor, Turret, Mount needs to be re-welded on, $200.00
Tow Bar, Medium, W/3/4 and 1" feet and axle clamps, Excellent condition, $550.00
Wheel, M35A3, no valve stem $125.00 Sold to Matt444
Beadlock, M35A3 $25.00 Sold to Matt 444
Cab Reinforcement Plate, NOS, $150.00 Sold to Setoyota
Assault Rifle Scabbard, MOLLE, New $30.00 Sold to Juanprado to be picked up by Timntrucks or Dockrocker
Oil Cooler for M35A2 Multifuel, Including all gaskets and o-rings NOS $250.00
ATV Wagon by Bosski with bedliner (New cost is ~$2000.00) $750.00
U-Bolts for M66 Gun Ring Posts for M35A2/A3, 4", NOS $50.00
U-Bolts for M66 Gun Ring Posts for Armored Vehicles, 6", Used $25.00
M35A3 Fuel Cap, Good Condition $25.00

NEED
Fender, M35A2/A3, NOS
M35A3 CTIS Wheel Valve Stem
M35A3 Passenger side mirror mount
Here are photos from the actual trailer. The trailer has electric brakes and an electrically actuated dump bed. You would have to wire up the controller, which is included, for the electric brakes and dump function. I'm going to bring the trailer to the GA Rally along with an ATV so you can see it being pulled.
 

Attachments

Last edited:

timntrucks

Well-known member
Steel Soldiers Supporter
4,038
119
63
Location
Ponchatoula LA
Pics of ladder, rewinder, gun leg. ac kit, mess kit, etc
 

Attachments

patracy

Administrator
Staff member
Administrator
14,635
4,794
113
Location
Buchanan, GA
I'm looking for:

M2HB pintle for a M3 stand
1919 parts kit (Don't need a barrel or bolt/FCG internals)
M114 parts, Specifically internal parts, the top engine cover grates, just about anything really.
PRC-320 Clansman radio
Tachometer bracket/housing for HMMWV
HEMTT wheels
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks