2018 Georgia Military Vehicle Rally buy-sell-trade

[sandcobra164]

Do any of you guys have some of these little tabs for the military fire extinguisher bracket? I've got a couple of brackets that are missing these.

View attachment 744101View attachment 744102View attachment 744103

You can have the one out of the passenger side of my M923 cab. It'll still be bolted in place but you're welcome to take it out.

 

[microjeep]

I just found a source for these new take off rear light kits. I thought they might could be used to make towing light kits. $20 each, can get dozens.

I'll take a pair.

 

[gimpyrobb]

Bringing some plastic water cans, 5 ton snatch block, some chains a tow light 2 officers mess kits a kit to install ac comp to a 8.3 as well as the compressor itself i also have a 100 ft generator cord came off a m750 , hub and axle for a duece, a oil cooler for 818, a 8.3 engine shipping container

Tim, do you have the spool that cable came off of available? I think they are sometimes in an aluminum box. Id be interested if available

 

[timntrucks]

no spool. i let that go with the trailer.

 

[timntrucks]

might bring a 5 step ladder for sale. its just a little short for my 925a2

 

[SCM35A2]

I would like the hyd. oil, thanks

Consider it yours sir!

 

[sandcobra164]

might bring a 5 step ladder for sale. its just a little short for my 925a2

Mr. Tim, I'll take the step ladder for my buddy with a Deuce as long as it had hooks on the top to keep it on the lip of the tailgate while it's down.

 

[TaylorTradingCo]

Tim, do you have the spool that cable came off of available? I think they are sometimes in an aluminum box. Id be interested if available

Gimpy, would this hose reel work? I may have one of these left.
Derek

 

[4XDesign]

I just found a source for these new take off rear light kits. I thought they might could be used to make towing light kits. $20 each, can get dozens.

I'll take two to go with my two tanks.
Thanks

 

[glcaines]

For Sale
M35A2/A3 passenger door, NOS?, complete, camo, $175.00 Sold to Floridianson
Snatch Block, NOS, 10-ton, looks brand new, $175.00
Armor, Turret, Mount needs to be re-welded on, $200.00
Tow Bar, Medium, W/3/4 and 1" feet and axle clamps, Excellent condition, $550.00
Wheel, M35A3, no valve stem $125.00 Sold to Matt444
Beadlock, M35A3 $25.00 Sold to Matt 444
Cab Reinforcement Plate, NOS, $150.00 Sold to Setoyota
Assault Rifle Scabbard, MOLLE, New $30.00 Sold to Juanprado to be picked up by Timntrucks or Dockrocker
Oil Cooler for M35A2 Multifuel, Including all gaskets and o-rings NOS $250.00
ATV Wagon by Bosski with bedliner (New cost is ~$2000.00) $750.00
U-Bolts for M66 Gun Ring Posts for M35A2/A3, 4", NOS $50.00
U-Bolts for M66 Gun Ring Posts for Armored Vehicles, 6", Used $25.00

NEED
Fender, M35A2/A3, NOS
M35A3 CTIS Wheel Valve Stem
M35A3 Passenger side mirror mount

Here are photos from the actual trailer. The trailer has electric brakes and an electrically actuated dump bed. You would have to wire up the controller, which is included, for the electric brakes and dump function. I'm going to bring the trailer to the GA Rally along with an ATV so you can see it being pulled.

 

[profo]

For FMTV and LMTV, front and rear brakes. New takeoff drums and complete backing plates. For 2 backing plates $100.00, complete with drums $150.00 for front or rear. I will only bring these if asked to.

Steve I will probably take a set of backin plates I need some spare brake canisters!

marty

 

[microjeep]

Looking for a couple of either hard tops or soft tops with bows for M35's preferred green soft top but will consider tan. Please p.m. If you have any of these. Thanks Micro

 

[steve6x6x6]

Front or rear axle or both? PROFO

 

[profo]

Front or rear axle or both? PROFO

set of each! if drums are the same front and back ill get one set with drums.

 

[glcaines]

For Sale
M35A2/A3 passenger door, NOS?, complete, camo, $175.00 Sold to Floridianson
Snatch Block, NOS, 10-ton, looks brand new, $175.00
Armor, Turret, Mount needs to be re-welded on, $200.00
Tow Bar, Medium, W/3/4 and 1" feet and axle clamps, Excellent condition, $550.00
Wheel, M35A3, no valve stem $125.00 Sold to Matt444
Beadlock, M35A3 $25.00 Sold to Matt 444
Cab Reinforcement Plate, NOS, $150.00 Sold to Setoyota
Assault Rifle Scabbard, MOLLE, New $30.00 Sold to Juanprado to be picked up by Timntrucks or Dockrocker
Oil Cooler for M35A2 Multifuel, Including all gaskets and o-rings NOS $250.00
ATV Wagon by Bosski with bedliner (New cost is ~$2000.00) $750.00
U-Bolts for M66 Gun Ring Posts for M35A2/A3, 4", NOS $50.00
U-Bolts for M66 Gun Ring Posts for Armored Vehicles, 6", Used $25.00
M35A3 Fuel Cap, Good Condition $25.00

NEED
Fender, M35A2/A3, NOS
M35A3 CTIS Wheel Valve Stem
M35A3 Passenger side mirror mount

Here are photos from the actual trailer. The trailer has electric brakes and an electrically actuated dump bed. You would have to wire up the controller, which is included, for the electric brakes and dump function. I'm going to bring the trailer to the GA Rally along with an ATV so you can see it being pulled.

 

[Rmtaunton]

Looking for 6.5 turbo hmmwv engine


Sent from my iPhone using Tapatalk

 

[wheelspinner]

Looking for 6.5 turbo hmmwv engine


Sent from my iPhone using Tapatalk

Robert I just texted you

 

[timntrucks]

Pics of ladder, rewinder, gun leg. ac kit, mess kit, etc

 

[timntrucks]

sold 2 water cans i have 5 left.

 

[patracy]

I'm looking for:

M2HB pintle for a M3 stand
1919 parts kit (Don't need a barrel or bolt/FCG internals)
M114 parts, Specifically internal parts, the top engine cover grates, just about anything really.
PRC-320 Clansman radio
Tachometer bracket/housing for HMMWV
HEMTT wheels