• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

CUCV-II 2000 Crew Cab

Stonepicker1

Stonepicker1

Well-known member
2,446
86
48
Location
Coconut Creek, Florida
I let the truck run for about 1 hour after filling with fresh fuel and a new fuel filter. Checked to see if there were any problems like over-heating / leaks or strange sounds...all looks good.
Put the truck in drive and reverse and transmission is working (in driveway...no brakes)

The battery gage was staying in the "Yellow" so I removed the inverter from behind the rear seat and sure enough the 30 amp fuse was blown. Replace the fuse and the needle is just in the "Green" now.

Still looking for a rear axle....finding a lot of good deals, but they are over 1000 miles away. Nothing close by yet.


:beer: BLOWS COLD AC :beer:
 

Attachments

lavarok

lavarok

Well-known member
1,119
33
48
Location
Fellsmere, FL
Thanks. Interesting, I see the input is 12v and output is 24v. What systems operate as 24v in the truck?
The sure power I used in my M1010 is reverse of this, 24v to 12v @ 100amp.
 
Stonepicker1

Stonepicker1

Well-known member
2,446
86
48
Location
Coconut Creek, Florida
lavarok said:
Thanks. Interesting, I see the input is 12v and output is 24v. What systems operate as 24v in the truck?
The sure power I used in my M1010 is reverse of this, 24v to 12v @ 100amp.
Click to expand...
The starter is 24 volts, NATO slave cable hookup in grill is for 24 volt and so is the guage on the dash.
I guess you could hook-up a 24 volt radio system.
 
Stonepicker1

Stonepicker1

Well-known member
2,446
86
48
Location
Coconut Creek, Florida
Lol......not much.
I haven't had time to work on the rear axle yet.....still thinking of making it a dually. Been looking for parts. It starts right up and blows cold A/C.
Someone won the "no title" CUCV-II crew cab out of VA last week. I was bidding, but went to high not doing a preview on it.
 
mudman

mudman

New member
383
10
0
Location
Carson City, NV
Man...That is alot of change right there, for a common truck with I.F.S. I hope it atleast has a locker in it some where. Coulda'a built two m1028's for that!!!!
 
Stonepicker1

Stonepicker1

Well-known member
2,446
86
48
Location
Coconut Creek, Florida
mr.travo

mr.travo

Member
422
0
16
Location
Comfort, TX
Phil-

You do great and very detailed work my friend! I am looking forward to watching your step by step progress with this one as well. The only thing that disappoints me is that I am not closer to help!

Keep us posted,

Travo
 
Warthog

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Hey Phil,

Think I should buy this and put the rear axle under my CUCV-II?

4.10 gears. It is at the insurance pool, as it was beat to heck by a hail storm.
 

Attachments

andytk5

andytk5

Member
356
0
16
Location
florida
Anymore updates on the truck or the axle swap? Love the idea of a dually cucvII, looks like you could just swap on the fenders and paint to match. Looking into getting one of these, how is the interior noise on the Hwy vs the M1009 or M1008?
 
Warthog

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
With my single cab CUCV-II the ride is like night and day. Super quite and with A/C!!!
 
You must log in or register to reply here.
110,655members
165,171threads
2,324,062posts
1,474online users
Top