Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
She will look mighty fine when she's all "dressed up", for sure (because she looks great now)!
But I kind of like that current "Farm Use Only" look, I got to tell you.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV2/CUCV-II Owners, post pics and info of your truck
- Thread starter Warthog
- Start date
But I kind of like that current "Farm Use Only" look, I got to tell you.
- 4,318
- 3,208
- 113
- Location
- Fort Worth, Texas
The color is closer to CARC 383 green than the photo shows, it's washed from the sun and camera. I think with time it will dull out and look pretty good. I'm thinking flat black rims, "US Army Official Use Only" on the door, and bumper markings to give some black contrast.
Last edited:
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
Looks great!
- 4,318
- 3,208
- 113
- Location
- Fort Worth, Texas
Does anyone know if the troopseats for these Gen II trucks are unique or can an older set work?
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Picked up a CUCVIII this week. It's a 2002 Chevrolet Tahoe. Runs great. Needs the regular maintenance stuff of a surplus vehicle. Will need a new AC compressor but I will likely replace everything short of the evaporator like I did in my CUCVIIs. This CUCVIII was on GSA a year or two ago. So far it's gotten new(er) tires, new starter, and both new front wheel bearings. I'll probably restore this one before my 2nd CUCVII because it appears this CUCVIII needs much less work. Interior is great and the seats are not ripped at all.
Most of the writing on this vehicle is in Arabic except for the dash. I think it was a USAF vehicle until returned to GSA and then sent to USDA. Then USDA sent it back to GSA and it was sold to the public. None of the blackout light system or 24v is tampered with and all works like it should. It appears the wiring is similar to the CUCVII platform with a 12v starter and 24v just used for the slave port and accessories. The converter in the back is 4x the size of a CUCVII for whatever reason. It's made by the same company. 49,XXX miles on the vehicle and no engine warning light on. It's a 5.3L gas 4x4 with electric 4WD. It's definitely a unicorn to match my other CUCVIIs.
Most of the writing on this vehicle is in Arabic except for the dash. I think it was a USAF vehicle until returned to GSA and then sent to USDA. Then USDA sent it back to GSA and it was sold to the public. None of the blackout light system or 24v is tampered with and all works like it should. It appears the wiring is similar to the CUCVII platform with a 12v starter and 24v just used for the slave port and accessories. The converter in the back is 4x the size of a CUCVII for whatever reason. It's made by the same company. 49,XXX miles on the vehicle and no engine warning light on. It's a 5.3L gas 4x4 with electric 4WD. It's definitely a unicorn to match my other CUCVIIs.
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Some more pictures of the CUCVIII
Attachments
- 4,318
- 3,208
- 113
- Location
- Fort Worth, Texas
I remember sitting in it as GSA and even bid on it. I do remember it being mentioned it drove in but smelled of death inside so no one wanted it. lol
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Attachments
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Haven't noticed it any worse than other surplus vehicles I've gotten. Probably had something to do with the 50 pounds of mud underneath and inside. Looks like the USDA liked driving it through creeks/rivers. Took me 2 hours to get all the mud out of the frame rails and body mounts. No rust issues though.
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
Nice catch, hrbergeron!
You got plans for the "new green", or are you meaning just to keep it around for some good fun?
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Going to build it similar to my CUCVIIs. Probably green w/ black accents. Will be putting hutchinson beadlocks on it. Going to try actual CARC this time instead of the rapco stuff. The rapco paint just isn't doing too well in the weather and the shade varies drastically. The only good thing about it is that it's cheap and I can touch up if needed with the spray cans.
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
The years it spent up in Pennsylvania and New York have been taking it's toll. Both the brake and fuel lines rusted out since I last drove it 2 years ago. So far I've replaced both brake and fuel lines with stainless, new caliper lines, all new ac components (minus evaporator), and door bushings. Coming up in the near future is a new rear axle, driveshafts, leaf spring shackle flip, rear disc brake conversion, new ball joints, and a new fuel tank. I'm sure I'll find more stuff to fix too.
Attachments
- 43
- 11
- 8
- Location
- College Station, TX
Is this for sale ?
- 4,318
- 3,208
- 113
- Location
- Fort Worth, Texas
I've been debating it. Message me if you'd like to talk about it.
- 43
- 11
- 8
- Location
- College Station, TX
I am not sure how to message you here. powerwagonwc12@gmail.com
- 300
- 391
- 63
- Location
- Geographical Center of Virginia
Some pictures from this weekend at Graves Mountain
Attachments
Arthurius
New member
- 2
- 4
- 3
- Location
- Phoenix, AZ
If anyone is interested in selling their 'CUCV-II Type A' (2-door tahoe) i would love to have a look! I have been looking for one of these for some time with no luck. Located in Arizona but willing to travel for the right MV. Thanks!
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
Arthurius
New member
- 2
- 4
- 3
- Location
- Phoenix, AZ
Yes! One of the members here did PM me to mention they may be willing to sell a very well restored CUCV-II Type A for a nice price. I am currently in talks to sell a few other toys and I'm hoping when I scratch the cash together he hasn't changed his mind!!