- 1,238
- 2,273
- 113
- Location
- Wenatchee, WA
It's been a long time working up to them but I finally got these monster AT3As mounted on the MV of the year! Luckily I bought the whole package right after Christmas before tire prices went crazy and I've been slowly working on them since January 28...
I chased every thread on all 7 rims by hand, shot blasted the wheels, painted them, replaced valve stem seals & o-rings and matched them up to tires.
Once all the wheels were mounted, torqued, antifreeze added, and pumped up to 10 psi i was ready to do the swap.
Cold morning warm up before heading to the shop.
Last time wearing the anemic 11:00s
I drove up on blocks so that I would only have to pump the jacks up 1" instead of 6"
I chased every thread on all 7 rims by hand, shot blasted the wheels, painted them, replaced valve stem seals & o-rings and matched them up to tires.
Once all the wheels were mounted, torqued, antifreeze added, and pumped up to 10 psi i was ready to do the swap.
Cold morning warm up before heading to the shop.
Last time wearing the anemic 11:00s
I drove up on blocks so that I would only have to pump the jacks up 1" instead of 6"
Last edited: