• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

First recovery from Ft. Leonard Wood, made it home

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
put one end in tank fill and tie off, other end clamp to in fitting at filter

I would use one of your trailer air lines as a temp hose.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
If you have to put a hole in the fill screen, do it so you can get hose to near bottom of tank.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
Yes, the strainer unthreads off the tank.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
I am sorta posting, not knowing what tools he has, the bare minimum for what he needs to get going, he has anything more is a +.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
A screwdriver used as a chisel, may spin it off(loosen it).

A leather belt or rubber engine belt.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
I'd be curious to know what happens if he tried to bleed the fuel system with the manual pump.

Is there fuel in the tank?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
Cold there?

Using fuel additive?

Has the filter been changed recently?
 
Last edited:

swiss

Well-known member
Steel Soldiers Supporter
2,727
838
113
Location
Oakwood, Ga
Cool a help thread with a good title and NOT HELPPPPPPPPPPPPPPPPPPP,

You are in good hands with DH and 73M819

Location would also be good in case members are near by and bored :)
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
If the vent line is plugged and the pump is causing a suction, just loosen the cap and see it it will run.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
He is on a recovery from Ft Leonard wood MO. Heading back to the NE corner of Oklahoma.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
Threads merged, background helps.
 
Last edited:
Top