USMC 00-08
Well-known member
- 1,182
- 179
- 63
- Location
- Skiatook, OK
That is really neat. Great pictures!! Did you get the rear main seal issue resolved?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
G749 preservation
- Thread starter m1010plowboy
- Start date
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
We found out that if you drain the bell housing and put the plug back in you can get it to a few more shows. I added a bottle of 'fix everything in your engine' off the shelf from my local parts store. It ran for a few hours on the weekend cruising around the airport and the 1 litre oil capacity on the bell housing seems to be holding
. The motor will be coming out anyway but we have one more big bash on Aug. 9th so she needs to hang in for the PPCLI 100th anniversary. We're planning a for a big show but you know how planning goes so more pics after it happens.
http://ppcli.com/100.html
. The motor will be coming out anyway but we have one more big bash on Aug. 9th so she needs to hang in for the PPCLI 100th anniversary. We're planning a for a big show but you know how planning goes so more pics after it happens.http://ppcli.com/100.html
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
M135 Preservation
In preparation for the PPCLI 100th Anniversary this weekend I gave up some time to help wash the windows in this old beater. http://www3.bc.sympatico.ca/deuce/index.html
We hit the highway with it and other than missing all the rattles and noise, it runs just like mine, but with 6 cylinders. It's a 'brand new', 62 year old truck, just amazing. Hidden in the glove box was issue #118 of Army Motors and David Doyle's article on the M135 with photo's of the factory and assembly line.
Goose and SuperDave's 52' will be together for the first time this weekend so we're dressing her up with some new 'orange' front lenses and some new glass.
In preparation for the PPCLI 100th Anniversary this weekend I gave up some time to help wash the windows in this old beater. http://www3.bc.sympatico.ca/deuce/index.html
We hit the highway with it and other than missing all the rattles and noise, it runs just like mine, but with 6 cylinders. It's a 'brand new', 62 year old truck, just amazing. Hidden in the glove box was issue #118 of Army Motors and David Doyle's article on the M135 with photo's of the factory and assembly line.
Goose and SuperDave's 52' will be together for the first time this weekend so we're dressing her up with some new 'orange' front lenses and some new glass.
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
PPCLI 100th Anniversary
The MVPA dragged equipment 200 miles to put on a dynamic display at Edmonton's celebration for the Princess Patricia Canadian Light Infantry PPCLI 100th Anniversary.
Goose had many visitors today who remembered the M135's and 211's that they drove in the service. This fine gentleman gave up a story about flying a deuce that was racing through a field and didn't see the road in front of them. No one would have known if the transfer case didn't fall off on landing.
A few more of Goose and the line-up.
We ran a little open convoy after the show and Goose's job was to keep up with SuperDave's ol' 52 M135....... and all we could do is watch him pull away.
More pics up later on the MV spotted thread.
The MVPA dragged equipment 200 miles to put on a dynamic display at Edmonton's celebration for the Princess Patricia Canadian Light Infantry PPCLI 100th Anniversary.
Goose had many visitors today who remembered the M135's and 211's that they drove in the service. This fine gentleman gave up a story about flying a deuce that was racing through a field and didn't see the road in front of them. No one would have known if the transfer case didn't fall off on landing.
A few more of Goose and the line-up.
We ran a little open convoy after the show and Goose's job was to keep up with SuperDave's ol' 52 M135....... and all we could do is watch him pull away.
More pics up later on the MV spotted thread.
USMC 00-08
Well-known member
- 1,182
- 179
- 63
- Location
- Skiatook, OK
Those are some really neat pictures. I would have liked to have been there in person.
cmpman
Member
- 85
- 7
- 8
- Location
- Manitoba Canada
Did you get any shots of the PPCLI bren gun carriers? One is from Shilo, and there should have been one from Edmonton. I did a little bit of work on the Shilo one.
nattieleather
Well-known member
- 1,882
- 143
- 63
- Location
- Cleveland, OH
That's such a beater you should just give it up to me....
Nice looking truck! Thanks for the pictures!
Nice looking truck! Thanks for the pictures!
Superdave
Member
- 342
- 12
- 18
- Location
- Onoway Alberta Canada
Seen the carrier and talked with the gentlemen there about it but did not get any pictures of it. Hey rob they tell me u acquired a few more 
cmpman
Member
- 85
- 7
- 8
- Location
- Manitoba Canada
Yep, three more. They are all for parts though as all of the hulls (except maybe one) have been fairly butchered. I have a complete one already, so for me these are just for sustainability of the present carrier.
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
PPCLI Carrier
Is this the carrier? Real nice if it is. Even held the buttons back on my jacket before I leaned into it, glad I did now.
The hanger display was 100 years long so I snapped a lot of pictures. It's been a real honour to be part of the PPCLI celebration.
Is this the carrier? Real nice if it is. Even held the buttons back on my jacket before I leaned into it, glad I did now.
The hanger display was 100 years long so I snapped a lot of pictures. It's been a real honour to be part of the PPCLI celebration.
Attachments
cmpman
Member
- 85
- 7
- 8
- Location
- Manitoba Canada
No, that carrier belongs to the Edmonton 2VP. The Shilo one is the one that is in dog turd brown with markings indicating service in Italy.
Section8
Member
- 503
- 6
- 18
- Location
- Little Fort, B.C., Canada
That would have been great to attend! The last time I was close to any green iron of any age was when I attended to a downed snow bird south of Moose Jaw in Saskatchewan. That was way back in late 1990's or early 2000's.
Was working as a paramedic back then.
Got a question for you Plowboy.
In some earlier posts in this thread and the unofficial G749 thread, the M135 that is gutted and on a platform in front of a maintenance building. What are the Diamond insignia representing?
I only ask because it just noticed them in the pictures. I was planning that same insignia being on my rig when it is repainted with a capital T behind it,
T.
It would be my ranch brand/name on the rig. Curious what the military used it for.
Was working as a paramedic back then.
Got a question for you Plowboy.
In some earlier posts in this thread and the unofficial G749 thread, the M135 that is gutted and on a platform in front of a maintenance building. What are the Diamond insignia representing?
I only ask because it just noticed them in the pictures. I was planning that same insignia being on my rig when it is repainted with a capital T behind it,
T.It would be my ranch brand/name on the rig. Curious what the military used it for.
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
Good question for our military kids. The answer here http://www.canadiansoldiers.com/vehicles/markings/vehiclemarkings.htm says tactical sign but I bet we can learn much more from cmpman.What are the Diamond insignia representing?
I only ask because it just noticed them in the pictures. I was planning that same insignia being on my rig when it is repainted with a capital T behind it,
cmpman
Member
- 85
- 7
- 8
- Location
- Manitoba Canada
Don't quote me, but usually a diamond indicates Headquarter Sqn of an Armoured unit. I went through a couple pages trying to find the photo you are talking about, but with this thread hitting 54 pages I had to give up. Can you tell me the post number?
I also just noted your discussion about the "high/lo" superstructure and tarpaulin from posts 517 and 518. When I check the NSNs of the parts applicable to this, they are all Canadian, which would indicate to me that they were purely a Canadian design, and would have been from the factory. It has gotten very difficult to find the tarps now with the extra level on them. I have an almost new one that needs repair, but even once I do get it it will be a shame to install it as I find canvas tarps are usually only good for about 10 years with todays sunlight.
I also just noted your discussion about the "high/lo" superstructure and tarpaulin from posts 517 and 518. When I check the NSNs of the parts applicable to this, they are all Canadian, which would indicate to me that they were purely a Canadian design, and would have been from the factory. It has gotten very difficult to find the tarps now with the extra level on them. I have an almost new one that needs repair, but even once I do get it it will be a shame to install it as I find canvas tarps are usually only good for about 10 years with todays sunlight.
Section8
Member
- 503
- 6
- 18
- Location
- Little Fort, B.C., Canada
The insignia in question is best seen in "the unofficial G749 picture" thread. Posting number 59 made by M1010plowboy. The open diamond insignia is seen on the left(driverside) of the front bumper and on the cab doors.
I was planning to do the exact same to my rig plus the T behind it but if it possibly gonna cause problems I may have to reconsider.
I was planning to do the exact same to my rig plus the T behind it but if it possibly gonna cause problems I may have to reconsider.
Last edited:
cmpman
Member
- 85
- 7
- 8
- Location
- Manitoba Canada
It won't cause any problems. The DND does not have any copyright or claim on a diamond. It could be different if you were putting tri-service decals on the doors.
The markings on that truck are mostly fantasy, as are some of the modifications done to it.
The markings on that truck are mostly fantasy, as are some of the modifications done to it.
Section8
Member
- 503
- 6
- 18
- Location
- Little Fort, B.C., Canada
Modifications? Aside from the windshield vents and civilian marker/signal lights. I don't recall much else for modifications. Unless out are referring to my dreams for my M135.
Glad I won't be pissing anyone off if the insignia is used on my truck.
Glad I won't be pissing anyone off if the insignia is used on my truck.
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
What insignia would you run on an m135 cmpman?
With no military background I don't have a preference on what it should look look like. Would like my semi gloss od m135 and shop van to have a real story though.
PPCLI is important to me with my buddies serving with them. Looking for input.
With no military background I don't have a preference on what it should look look like. Would like my semi gloss od m135 and shop van to have a real story though.
PPCLI is important to me with my buddies serving with them. Looking for input.
cmpman
Member
- 85
- 7
- 8
- Location
- Manitoba Canada
Section8: I am not referring to your deuce or your planned markings. It is your truck so you can do as you wish. Putting your ranch markings on it seems fitting enough.
M1010. I guess the best thing is to have preserved what markings were on the trucks when you found them. Otherwise, go hit up the unit's archives, and see what was on the vehicles for the time periods that you are interested in representing. If you are going to the 50s, then there was some color involved. For example, Brigade markings in Western Canada for the earlier period was a red square with a yellow maple leaf (not the modern flag maple leaf either, but rather the more realistic looking maple leaf of that time period). On the early paint scheme of semi gloss, you might have the CFR on the doors, and later you may have the mobile command decals or possibly the tri-service decals on the doors.
By the 70s, the markings (and paint) became much more subdued. They were also detailed out in orders what belonged on the trucks. You had the vehicle call signs on the door, the red and white Cdn flags front and back, the tire pressures were supposed to be over the wheel wells, and the bridge class which was normally on yellow. However, it was not uncommon to see the bridge class subdued in either black or grey. The Cdn flag was also quite often subdued as well, being stencilled on in black. But officially the flag was the red and white decal. The unit markings were just the black rectangle with the unit symbol inside. By symbol I mean the symbol as agreed in Nato, and not a crest.
Trucks were not named, other than sometimes jokingly in chalk. But you certainly did not show up on GOC's parade with your girlfriend's name or some rambo like name painted on your truck.
I see way too often where collectors add on every marking they can think of from several time periods trying to make their trucks look more military. If the collector's aim is to preserve some military history, then a little research can go a long way to doing that.
M1010. I guess the best thing is to have preserved what markings were on the trucks when you found them. Otherwise, go hit up the unit's archives, and see what was on the vehicles for the time periods that you are interested in representing. If you are going to the 50s, then there was some color involved. For example, Brigade markings in Western Canada for the earlier period was a red square with a yellow maple leaf (not the modern flag maple leaf either, but rather the more realistic looking maple leaf of that time period). On the early paint scheme of semi gloss, you might have the CFR on the doors, and later you may have the mobile command decals or possibly the tri-service decals on the doors.
By the 70s, the markings (and paint) became much more subdued. They were also detailed out in orders what belonged on the trucks. You had the vehicle call signs on the door, the red and white Cdn flags front and back, the tire pressures were supposed to be over the wheel wells, and the bridge class which was normally on yellow. However, it was not uncommon to see the bridge class subdued in either black or grey. The Cdn flag was also quite often subdued as well, being stencilled on in black. But officially the flag was the red and white decal. The unit markings were just the black rectangle with the unit symbol inside. By symbol I mean the symbol as agreed in Nato, and not a crest.
Trucks were not named, other than sometimes jokingly in chalk. But you certainly did not show up on GOC's parade with your girlfriend's name or some rambo like name painted on your truck.
I see way too often where collectors add on every marking they can think of from several time periods trying to make their trucks look more military. If the collector's aim is to preserve some military history, then a little research can go a long way to doing that.
- 3,908
- 2,712
- 83
- Location
- Edmonton, Canada
Original Shop Van Interior
Where does a guy find original interior pictures of the various 50's-80's shop van interiors?
Just trying to get an idea of the various uses and how one could set up an interior that may have been found in the field........and slept in.
Besides Patton, who else had a home on wheels dedicated to them and did any of you ever have the luxury of sleeping in the van, back in the day?
I'm coming out of the closet and finally admitting......... I slept with Gracie,
There's so much more room in this ole' thing then the closet had.
She came from Yellowknife with bells on so trying to make it look like it did when it was first in use would, in the very least, be educational.
The white paint which covered the original 'sea-foam'?? color was done well but I'd like to look at more options.
So if anyone has some old shop van photos archived or some memories and stories of the shop van I would appreciate the info.
Where does a guy find original interior pictures of the various 50's-80's shop van interiors?
Just trying to get an idea of the various uses and how one could set up an interior that may have been found in the field........and slept in.
Besides Patton, who else had a home on wheels dedicated to them and did any of you ever have the luxury of sleeping in the van, back in the day?
I'm coming out of the closet and finally admitting......... I slept with Gracie,
There's so much more room in this ole' thing then the closet had.
She came from Yellowknife with bells on so trying to make it look like it did when it was first in use would, in the very least, be educational.
The white paint which covered the original 'sea-foam'?? color was done well but I'd like to look at more options.
So if anyone has some old shop van photos archived or some memories and stories of the shop van I would appreciate the info.