Erik Jenkinson
Member
- 121
- 8
- 18
- Location
- Metairie, LA
With my m1009 at idle, I have 14.4 at gen 1, which I just rebuilt, and 30 at gen two( Iam guessing that this is thier combined number, I was testing by holding onto the red wire and ground.) At Idle my front battery shows 14.4, my rear 14.7. My gen1 bulb was out for a couple days, so I replaced it, it lights up now at start, no problem. My gen 2 bulb is dimly lit at idle, then dissapears with rpm. I have another rebuild kit. Is it time for gen2 rebuild? My instrument panel is on the to do list as well. What is my best course of action? Here are some possible contributing factors. The burnt out gen1 bulb, I have done the doghead mod already, and have throughly gone over the fuel system, and installed a Racor spin on. I also just cleaned and replaced my heater and 24v fuses. I recently installed a new heater core. My voltmeter is right on the mark in the green after the glow plugs cycle, in yellow right after starting.
Last edited: