• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Generator drive pully. Cummins

texas-5-ton

Member
287
10
18
Location
Grandview, TX
After I posted earlier Mike, I got to thinking that maybe you could take your generator (or pulley) to you local alternator or generator shop. The one here usually has a mountain of old alternators laying around and maybe they could get you fixed up as well. One more avenue, you might also check with Red River and see if they can get one for you.
hope this helps [thumbzup]

Chad
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,758
113
Location
Monrovia, Ca.
Is it the pulley on the gen. or the pulley behind the damper?
 

TheBuggyman

New member
663
5
0
Location
Fredericksburg, Virginia
Alright, took off the pulley I have and it measures an approximate 5/8" bore with a keyway, overall OD of 3-5/8" and two grooves. Did not find the SP992 number that you listed but on the back of mine are two casting numbers as follows:
LN78128
ORD.108898(or 9)29

Let me know if this will work.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks