Al Capone
Active member
- 358
- 38
- 28
- Location
- Pearl river la
Led lights
Pics
Pics
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Goat Project
- Thread starter prodro1
- Start date
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
Well...It finally happened. I had some down time yesterday and me and my dad got the transmission back together. It finally moves under her own power. It is such a relief...It is a little hard to go from reverse to first. You have to put quite a bit of pressure on the shifter for it to come out of reverse. I still have to trouble shoot that issue. Also i just have to figure out how to hook up the alternator (someone cut the wire harness that goes to it). Get some new lights (d/s tail light, and d/s front blinker/park light) and a new head light. I still want to put the l.e.d's in it but money is kind of tight at the moment, We have a baby on the way and should be here by the 10th of Jan. so all of my funds are going to that. I will try to post a video of her running soon.
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
Goat first drive
https://youtu.be/pN3NlK0aPkg
My dad was driving and he thought it wasnt able to steer, but he was mistaken.
https://youtu.be/pN3NlK0aPkg
My dad was driving and he thought it wasnt able to steer, but he was mistaken.
Another Ahab
Well-known member
- 18,007
- 4,582
- 113
- Location
- Alexandria, VA
That's terrific news. Best wishes to all, including the soon-to-be baby!
Al Capone
Active member
- 358
- 38
- 28
- Location
- Pearl river la
I installed the current guess they are led bright white light headlights . Those suckers are bright . I got all my lights working today . Still need s three way connector for blinker on right rear so two bulbs blink instead of one . Do u have the metal frame work for the soft top for your goat ? I think I have a extra set .
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
1 more issue, I cant seem to get the alternator to start charging. The fire department did a pretty crappy job of installing the aftermarket one, and it seems that someone cut one of the wires on the harness that went to the original.
- 2,131
- 84
- 48
- Location
- Maine USA
Are you trying to get the aftermarket one charging or an original ?
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
I'm trying to get the aftermarket one charging. Until I can find an original for a good price
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
- 2,131
- 84
- 48
- Location
- Maine USA
Would have to know the make and model of the alternator in order to help you out.
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
- 2,131
- 84
- 48
- Location
- Maine USA
Can you post a picture of the back of it? and do you know if it is 24V ? The goat uses a standard 60A 28V alternator but the pulley is special to the goat.
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
I will post a better picture of it tomorrow. It's a 12v alternator as far as I can tell. Don't know much more about it
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
- 2,131
- 84
- 48
- Location
- Maine USA
Well if it's 12v is the starter 12v as well? stuff we need to know, like if it has been converted to 12v.
Here is the factory set up. You should have two large leads and one small one with a Packard connector. #3 large is your ground, lead #12 is the small wire with Packard connector, lead #2 should be your large positive lead to the alternator.
Here is the factory set up. You should have two large leads and one small one with a Packard connector. #3 large is your ground, lead #12 is the small wire with Packard connector, lead #2 should be your large positive lead to the alternator.
Attachments
Last edited:
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
I looked at that truck a while back before prodo bought it, i noticed it had a 12v alternator but cant remember how it was wired up. Fire departments make some hoky mods sometimes.
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
Come to find out the alternator is in fact 24v. I just have to figure out what was done to it. Its putting current out, but just not to the batteries.
Jericho
Well-known member
- 1,180
- 69
- 48
- Location
- Landaff NH
if it has ouTput make sure its connected across the batteries IN SERIES if your running two 12 volt batteries. Charging voltage comes BACK into the batt on the NEGITIVE SIDE. Goat body is aluminum, ENSURE YOU HAVE A GOOD GROUND TO BRING THE CHARGING VOLTAGE BACK ON
prodro1
Member
- 102
- 5
- 18
- Location
- Keithville, LA.
I haven't had time to do anything lately. My son was born on the 6th, and he has been keeping us pretty busy. I am trying to upload a few pics of my wiring harness to see if any one of you guys have any suggestions..
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
- 2,131
- 84
- 48
- Location
- Maine USA
I'm not seeing any pictures, ok see them now.
Last edited:
- 2,131
- 84
- 48
- Location
- Maine USA
Looks like the positive lead going to the alternator, however it would have to be a self exciting one wire alternator to work as wired. Is it making voltage when running? Congrats on the new addition. OK, missed that it is working but no juice to batteries. You will need to trace that alternator cable to where it terminates which should be the terminal board, factory location is under the radiator, from there another cable should run up to the battery positive cable on the drivers side.
Last edited:
Another Ahab
Well-known member
- 18,007
- 4,582
- 113
- Location
- Alexandria, VA
That's great. Congratulations!
And now that you got the wiring harness covered with a pic, you got to post a pic of the little man!
And I sure hope Mama is recovering okay; best regards to all!