Hummer wheel lug bolt pattern, fit M880?

[dodjh]

Hi, does the Hummer run flat 16.5's lug bolt pattern fit the M880? The tire is 36 X 12.5 X 16.5.

 

[gringeltaube]

Yes, both vehicles share the same bolt pattern: 8 on Ø6.5"

You are aware that the HMMWV-wheel has about 2-1/4" more backspace than the M880-wheel..?


G.

 

[MWMULES]

I used 2" spacers, before and after

 

[dodjh]

Do you need the 2" spacers on the front only or also on the back? Where do you buy them?

 

[MWMULES]

Yep both ends, due to the offset tires will not clear the rear springs. Got mine online they were both sold as used sets on Ebay but you can see in the picture it wasn't used long. I have also seen the 36's mounted on the stock dodge rims w/o the run flat.

 

[dodjh]

gringeltaube I wasn't aware of the backspace issue, thanks.

MWMULES what ebay category did you find then in and what price do they run?Do the 36's work well on the M880?

 

[Bob H]

.............................Do the 36's work well on the M880?

Your word "well" is an opinion, they do work.


I was the 1st one to make it up this hill, got bored waiting for someone else to make it so I took the pic of it sitting there. Another M880 with the 9.50-16.5's was stuck at the bottom.

an add a leaf up front helps.

 

[dodjh]

Bob H, does the front end bottom out or does the extra leaf even out the suspension overall?

 

[MWMULES]

Just put in Dodge 8x6.5 Wheel Spacers, it was years ago but less than $150 for all 4. Mine is a M885 so has the extra springs for carrying a shelter.

 

[dodjh]

I have extra spring assembly's, so I could use one of them. A shelter is a good idea...is it metal or wood?