- 2,118
- 67
- 48
- Location
- Maine USA
Tom, while I was cleaning out my spare carrier I found a handful of engine cover slats, I think you said you were missing some. A good tig welder could easily replace them.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I have joined the Goat herd
- Thread starter combat32
- Start date
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
No not missing any some of mine are just bent, thanks though.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Happy 4th too all here!
- 2,118
- 67
- 48
- Location
- Maine USA
Happy 4th Tom.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Small update, should have motor back here at my fort Monday, will try to fire it off then. I need to order a new crossover cable from Saturn before I put the motor back in the truck.
- 2,118
- 67
- 48
- Location
- Maine USA
Good news, now is the time to change that cable for sure.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Argh! I got a bad injector, but my buddy in Maine is sending me some replacements!
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
I am beginning to think now that this is what caused the runaway on this engine and subsequent bent valves, mystery solved.
- 2,118
- 67
- 48
- Location
- Maine USA
In stock.
Attachments
- 2,118
- 67
- 48
- Location
- Maine USA
While you are waiting for them to arrive try soaking the stuck one in some type of solvent for a couple of days to see if the rack frees up.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Will do!
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
This really sucks we were gonna ground hop the motor on Monday.
- 2,118
- 67
- 48
- Location
- Maine USA
Package is on it's way, wish I could make it go faster! Try soaking the stuck one in laquer thinner or acetone and see if the rack will free up, it should just be gummy fuel holding it in place. AMgeneral was able to free his up perhaps you can consult with him.
Last edited:
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Got new injectors, thanks Mark
- 2,118
- 67
- 48
- Location
- Maine USA
Great, good luck.
- 2,118
- 67
- 48
- Location
- Maine USA
Tom, I measured 11 3/8 from center of governor pin to center of rack pin, picture is how I measured it. It was my experience that I could not remove or install the rod with the head bolt nearest the governor in place, not enough clearance. Mark in TX may still have his if it did not get launched into the scrap bin or modified for his LMTV. Even with the head bolt removed it was tight, good luck.
Attachments
Last edited:
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Thanks partner, Mark is out of goat parts looks like we will fab a new one.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Good news today, everything is back together on the engine. It will be back at my my fort on the 22nd, we will ground hop it then.
Will try to get some video, hopefully not of pistons flying through the air.
Will try to get some video, hopefully not of pistons flying through the air.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
I know for sure that you wouldn't be happy with a video like that.
But it WOULD have its own entertainment value for some of the rest of us.
opcorn:
- 805
- 71
- 28
- Location
- Kennewick, WA
Just wondering, did you ever receive a better copy of that disco goat video?
Sent from my Galaxy Nexus using Tapatalk
Sent from my Galaxy Nexus using Tapatalk