• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

injector line problems

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Orings or shaft can leak fuel into the oil.

Take the shut-off cover off, turn on the ignition switch(in-tank pump on) and look in and see if you see fuel leaking.


FDC can leak too. Bypass it.
 

welldigger

Active member
2,602
15
38
Location
Benton LA
Orings or shaft can leak fuel into the oil.

Take the shut-off cover off, turn on the ignition switch(in-tank pump on) and look in and see if you see fuel leaking.


FDC can leak too. Bypass it.
The HH o-rings and fuel control rod o-ring are a common culprit for oil contamination. Those and the fdc. If you have a fdc.
 

10NUGGET01

New member
19
0
0
Location
Oxford Alabama
Ok let me go check that.

The FDC has been bypassed by the military. Well that's what the sticker says.

Just to double check myself. The cover is the one below the HH sorta football shaped right?
 

10NUGGET01

New member
19
0
0
Location
Oxford Alabama
Can one of you guys call maybe? I feel like I can't explain what's happened like this and it would help me out tremendously for some one knowledgeable (like one of y'all) to maybe help me understand how I messed my Bobber up.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks