• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

JUMPSTART M998 (24v) WITH 12v BATTERY PACK

springer1981

Well-known member
844
1,150
93
Location
Maine
Yes but only across 1 battery. If the other battery is dead that it might not work. If you have 1 battery that is weak then you can use that battery pack on the weak battery.

You CAN NOT put it across both batteries. If you have 2 battery packs then you could put 1 on each battery.
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,716
19,766
113
Location
Charlotte NC
in this case, the rear battery is the weak one. So if I put it across that batter and try to start, it should be ok?
.
If you mean connect to the positive and negative posts on the low / weak battery with your jump start box - yes. That should work and has worked in the past on a lot of 24v machines. It may not give you much "juice" but it is worth a shot. Otherwise, put a charger on each individual battery overnight.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
If you have a "week" battery then you should replace both of them before you get some real grief like a smoked EESS or burned up regulator.
really good matched batteries are your best defense against trouble.
 

Coug

Well-known member
Steel Soldiers Supporter
2,975
4,356
113
Location
Olympia/WA
if you have the old 60 amp system, you should rotate the batteries every month or so. The front battery tends to receive a little more charge than the rear, and over time that imbalance grows to the point that the front battery dies from overcharging, while the rear dies from undercharging.
It's not serious short term, but over a long period of time it can eventually lead to some serious issues.

Another option is to hook up 12V chargers to them individually to bring them up to full charge on a regular (like monthly) basis.
 

Coug

Well-known member
Steel Soldiers Supporter
2,975
4,356
113
Location
Olympia/WA
some related info in this thread. Post #9 shows how I do jump starts from 12V packs.

 
Top