LH drivers side "box" ammo door

[M37Dale]

Looking for information on buying a LH box ammo door if anyone has one, or ideas on how to make one \. I have the handle , hinge, and the latch already!

 

[ODAddict]

Is yours an M37 or M37B1?

 

[M37Dale]

Is yours an M37 or M37B1?

It has a swivelling pintle hitch it isn’t rusty I believe it’s an M37 1952

 

[ODAddict]

Production shifted to B1s in April, 1958. It appears that for a while, Dodge used up existing parts stock from the basic M37 inventory.

f I'm not mistaken, the B1s were modified to include a staple such that the door could be secured with a padlock. My B1 (October 195 has a rather crude modification to the doors made by using a torch to cut both the staple from bar stock and a rectangular hole in the door itself.

If you're not in a hurry, I may have a door . I have both an unmodified M37 set and my original cutouts.

 

[G744]

"Ammo" door? That spot was for things like the lug wrench & jack, snatch block, eTc. BTW, both sides were the same...

 

[M37Dale]

Production shifted to B1s in April, 1958. It appears that for a while, Dodge used up existing parts stock from the basic M37 inventory.

f I'm not mistaken, the B1s were modified to include a staple such that the door could be secured with a padlock. My B1 (October 195 has a rather crude modification to the doors made by using a torch to cut both the staple from bar stock and a rectangular hole in the door itself.

If you're not in a hurry, I may have a door . I have both an unmodified M37 set and my original cutouts.

Let me know. And thanks

 

[M37Dale]

Production shifted to B1s in April, 1958. It appears that for a while, Dodge used up existing parts stock from the basic M37 inventory.

f I'm not mistaken, the B1s were modified to include a staple such that the door could be secured with a padlock. My B1 (October 195 has a rather crude modification to the doors made by using a torch to cut both the staple from bar stock and a rectangular hole in the door itself.

If you're not in a hurry, I may have a door . I have both an unmodified M37 set and my original cutouts.

hello, wondering if you have made any progress on these? Ironically the one on the right side has a locking tab for the handle. either one would be fine if you have one.

Dale

 

[ODAddict]

Hi Dale,

Can you send a private message to me? I think we can work out something for you.

 

[Mullaney]

Hi Dale,

Can you send a private message to me? I think we can work out something for you.

.
Dale doesn't have enough posts to be able to PM you.
Possibly you could PM him?

 

[Mullaney]

.
Dale doesn't have enough posts to be able to PM you.
Possibly you could PM him?

.
@ODAddict

 

[ODAddict]

Will do. Thank you.

 

[M37Dale]

Will do. Thank you.

Thanks for getting these parts to me John they will work out well towards the restoration.

Dale