• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1070 recovery

Status
Not open for further replies.

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
Airborne, my buddy thinks he knows you, says you live around the corner from him.

The truck is here, I'll leave Sunday morning if you wanted to bring your son to see it.
 
814
16
18
Location
Universal City, TX
Airborne, my buddy thinks he knows you, says you live around the corner from him.

The truck is here, I'll leave Sunday morning if you wanted to bring your son to see it.
Is your friend the one with the ham radio? I do live right down the road about 3 circles down. I will stop by tomorrow after the car show I am attending.
 

HETvet

Member
395
7
18
Location
Bedford, texas
I was in 96th trans for just over 6 years. Went to 418th jan of this past year for a deployment. When we got our hets from leather neck, we got them from 377. Any one who wants the info I have, please feel free to PM me.

It's interesting to me that your running about 400 miles on one payload of fuel. I say that cause I have never been able to run DF2 in one before. I always knew JP8 was garbage fuel, but I didn't know it was that bad. The best mileage I've gotten was 370-375 to a full pay load. I wish you could have stopped in Fort hood, I would have loved to throw some of my experience on that thing for ya.
 

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
So here is something to make you laugh.

Went to get some breakfast and took the 1070.

Buddy told me I couldn't park it in the parking lot of mcdonalds and I should park in lowes instead.

Challenge accepted!

I had to get fuel anyway, so why not get some mcdonalds while out, lol

ImageUploadedByTapatalk1403361635.991947.jpg
 
Last edited:

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
:tigger:




The M1070 is inside the lines. :rules:
I have a simple rule that I live by, don't buy it of you can't drive it. Hopefully gl and the dod will come to a resolution so I can put another bid in on a het.

Buddy was surprised I got it between the lines, let alone between the cars.

I went to sonic yesterday for lunch.

You can't be scared of these vehicles, but at the same time you have to respect them.
 

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
So I meant to post this yesterday but was being lazy instead.

Got the 818 hooked up, and custom iv cable works great. For me I disconnected both the turn signal switch on the steering column and the 3 switch box. Disconnecting the main 3 switch box took the front lights out and kept them independent of the truck so I'm not trying to charge the 818s batteries with my cable.

As far as the hooks on the chains. I zipped tied them to ensure they stay where they need to be and it they have to work the tension will take over.

ImageUploadedByTapatalk1403528063.383579.jpg

ImageUploadedByTapatalk1403528076.199351.jpg

ImageUploadedByTapatalk1403528088.583524.jpg

ImageUploadedByTapatalk1403528098.516318.jpg

ImageUploadedByTapatalk1403528247.014940.jpg
 

Carlo

New member
1,364
20
0
Location
palazzago italia
I got a notice the European Army Equipment Disposal may be offering M1070's. But I know for a fact there are non left in Europe. My contact says they will be coming from overseas. I asked if it was the USA and he would not reply.
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,251
1,702
113
Location
Dayton, OH
So here is something to make you laugh.

Went to get some breakfast and took the 1070.

Buddy told me I couldn't park it in the parking lot of mcdonalds and I should park in lowes instead.

Challenge accepted!

I had to get fuel anyway, so why not get some mcdonalds while out, lol

View attachment 500278

They said the same thing when I drove my Deuce to work. It was in the spot and between the lines. :)
 

HETvet

Member
395
7
18
Location
Bedford, texas
When I get home from work, I'll post what happened, why it happened, and what you can do to remedy it. Not to embarrass any one or call any one out; more so the intent to help others should the same symptom arise with their personal equipment
 

NDT

Well-known member
Steel Soldiers Supporter
10,412
6,430
113
Location
Camp Wood/LC, TX
When I get home from work, I'll post what happened, why it happened, and what you can do to remedy it. Not to embarrass any one or call any one out; more so the intent to help others should the same symptom arise with their personal equipment
Let me deduce what happened earlier today. (Since the 911 thread was quickly closed) The 10W-40 oil got a little thin in the 90 degree heat, and triggered the low oil pressure sensor in the DDEC ECU, which triggered all the alarms. Then the engine heat soaked the starter motor, causing the winding overheat thermal sensor to open and inhibit cranking. Heaven forbid how do you 88Ms deal with all these mission critical failures?
 

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
Let me deduce what happened earlier today. (Since the 911 thread was quickly closed) The 10W-40 oil got a little thin in the 90 degree heat, and triggered the low oil pressure sensor in the DDEC ECU, which triggered all the alarms. Then the engine heat soaked the starter motor, causing the winding overheat thermal sensor to open and inhibit cranking. Heaven forbid how do you 88Ms deal with all these mission critical failures?
Pretty much, was really aggravating because I checked all fluids before I headed out.

Didn't have the issue with the starter overheat on the second day and it was just as hot. But then again I wasn't pulling 19,500 the second day.

Ok, dumb dumb moment, or as I tell my wife, blond moment.

Ehh, live and learn, just don't break it in the process of learning.
 
Last edited:

NDT

Well-known member
Steel Soldiers Supporter
10,412
6,430
113
Location
Camp Wood/LC, TX
So let me guess, the workaround in the sandbox was a funnel in the cab with a hose leading to the starter; won't crank, just empty your canteen out? And for the check engine alarm, remove check engine indicator bulbs and disconnect buzzer?
 
Status
Not open for further replies.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks