Creed
Member
- 38
- 28
- 18
- Location
- Salt Lake City
So I got nos. 1,2,3,4 coming out of relay and 290B, 290C, 29T and 57T on the other side.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1123A2 engine noise while traveling on highway.
- Thread starter Creed
- Start date
GuntherRommel
Well-known member
- 264
- 525
- 93
- Location
- Bend, Oregon
Page 54 supplemental
- 6,873
- 9,519
- 113
- Location
- Papalote, TX
Look at the picture in post #20 and match it to the schematic in post 22, you probably cannot do it wrong as you have 2 male and 2 female connectors and it looks like it really does not matter what polarity the coil and contacts are connected.
Probably the breaker also
Probably the breaker also
Creed
Member
- 38
- 28
- 18
- Location
- Salt Lake City
Ok. Thats what I was asking. I didn't know if it mattered.
- 6,873
- 9,519
- 113
- Location
- Papalote, TX
I guess that answers the question about if you were in limp mode, you might want to step back and do a thorough inspection as honestly you should have put eyes on that before you went for a drive.
Creed
Member
- 38
- 28
- 18
- Location
- Salt Lake City
I agree. No one told me I have to put back everything i took out. Lol
- 4,390
- 4,170
- 113
- Location
- Brentwood, Calif
49mph in limp mode….SMH
- 6,873
- 9,519
- 113
- Location
- Papalote, TX
It did sound like a 120V sewing machine running on 240V
Creed
Member
- 38
- 28
- 18
- Location
- Salt Lake City
I wanted to thank you guys for all of your help. Its works great now. I couldn't have done it without you. Was just confused about the relay. Its so far from the TCM that I didn't know that what it was. Thanks again.