- 5,368
- 3,379
- 113
- Location
- Lexington, South Carolina
the 6500 BTU/h unit I have in the M109 box works well (cools it down in 90 degree + weather). If your insulation is better than the fiberglass the military used, you should be fine.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M146 RV Conversion
- Thread starter RAYZER
- Start date
FMFDOC
Member
- 77
- 1
- 8
- Location
- Mount Airy, MD
Just stopping by to throw these guys into the mix:
http://www.lehmans.com/
and this from another thread:
http://www.glen-l.com/campers/campers.html
And this which just occurred to me:
http://www.westmarine.com/webapp/wcs/stores/servlet/TopCategories1_11151_10001_-1
Not really putting those out there for any real reason, but they have useful stuff.
Kerosene refrigerators for example... Kinda neat.
http://www.lehmans.com/
and this from another thread:
http://www.glen-l.com/campers/campers.html
And this which just occurred to me:
http://www.westmarine.com/webapp/wcs/stores/servlet/TopCategories1_11151_10001_-1
Not really putting those out there for any real reason, but they have useful stuff.
Kerosene refrigerators for example... Kinda neat.
ODDBALL007
New member
- 569
- 5
- 0
- Location
- GENEVA FLORIDA
wow the 15000 btu unit thats being installed in my m109 is over kill i guess, unless i need to deep freeze something
FMFDOC
Member
- 77
- 1
- 8
- Location
- Mount Airy, MD
- 18,541
- 5,852
- 113
WOW, a cooler like that should make this little feller feel right at home......
http://www.wimp.com/tickledpenguin/
Armada
New member
- 3,046
- 4
- 0
- Location
- Buick City, MI
Great project! Looking forward to the progress!
JDToumanian
Active member
- 1,655
- 14
- 38
- Location
- Phelan, CA
I really like those trailers and look forward to following this project. Can a deuce tractor pull that trailer okay?
Jon
Jon
Armada
New member
- 3,046
- 4
- 0
- Location
- Buick City, MI
Hey JD. Yes, the trailers were designed for the deuce. They ride on 9x20 tires. In fact hooked to a 5T the trailer sets kinda low in the arse, but you hardly know it's there. Weight is just over 7K.
Attachments
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Thats a good question because a deuce ww converted to road tractor is what I plan on pulling this with.
- 18,541
- 5,852
- 113
I've considered the same combination, except using a TOW DOLLY behind a standard Deuce. The only significant drawback to this would be backing up with the double-jointed hitching.
Any other thoughts on this approach?
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
I also thought of this as an option,but the combined weight of the deuce bed and the tow dolly would be between 3-4k lbs(i think),this might slow the rig down a bit,i hope I can get at least 50mph out of her.
- 18,541
- 5,852
- 113
Good point!
Being in the "flat lands" out here in west Texas I forget about hillclimbing and such.
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
It would be nice to have the extra cargo capacity with the deuce bed. Hill climbing will be a whole other issue with eather scenario.
- 1,964
- 215
- 63
- Location
- Arizona
Something I've always wondered is the legality of dollies.
I know here in Arizona, you can pull more than one trailer, but the first one has to be a fifth wheel trailer. I think this is true in a lot of other states as well. Is a dolly a trailer? Do the military dollies have lights and brakes? Do they need license plates? Again, I imagine this depends on the state. Food for thought...
- 4,763
- 1,164
- 113
- Location
- Gaithersburg, MD
Ray, I once had an M275A2 (Kenny's old deuce tractor) that I used to haul around an M313 and the it drove down the highway doing 50-54 MPH without a problem. Hills did slow it down, but not too badly. I am sure you'll be fine with the M35A2 conversion to a road tractor. Great job!
stancanpara
Member
- 261
- 2
- 18
- Location
- Montpelier VA
I LOVE this idea! This would be perfect to pull behind my M275! 
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Some bathroom fixtures that i picked up today!
Attachments
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
quick question how long is the m146?
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Here you go! 22' on the inside.
Attachments
Last edited:
stevegr
New member
- 190
- 2
- 0
- Location
- Central FL
Nice lookin toilet Ray. Is it plumbed in? I just ate a big breakfast and I need to go.