• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M871 / m872

Artisan

Well-known member
2,761
227
63
Location
CDA Idaho
Guys would these statements be true?

An M871 is well suited for a M932 tractor

An M872 is well suited for a M916 tractor

An M871 can be pulled buy an M932 and M916

An M872 can be pulled by an M932 and an M916 but it is over kill and better suited for an M916


TIA!
 

patracy

Administrator
Staff member
Administrator
14,640
4,820
113
Location
Buchanan, GA
If you want the trailer to ride level, you'll need to pull them with a m915. You can definitely feel the weight of the m871 when pulling it with an m931/932.
Having dragged my M871 back with my 931, I would agree with this statement. Even unloaded, hills were noticeable. :(
 

NDT

Well-known member
Steel Soldiers Supporter
10,473
6,555
113
Location
Camp Wood/LC, TX
Don't forget the M916 and M920 have the fifth wheel plate for the large pin. You have to change it out in order to couple to the 871 and 872. The plate is an $850 item and the p/n is listed here somewhere.
 

M1075

Active member
3,589
6
38
Location
Oklahoma City
The M871 and M872 are very well suited for the M915A1. Neither are well suited for the M916. The M871 is well suited for M931 in lower speed and offload environments.
 

Artisan

Well-known member
2,761
227
63
Location
CDA Idaho
...and what Mil trailers would be well suited for an M916?

Additionally is there someplace in the TM or other-pace I can read this stuff?

Thank YOU!
 

NDT

Well-known member
Steel Soldiers Supporter
10,473
6,555
113
Location
Camp Wood/LC, TX
...and what Mil trailers would be well suited for an M916?

Additionally is there someplace in the TM or other-pace I can read this stuff?

Thank YOU!
Bighurt is correct but mainly the M172A1, in that combination it is known as the "LET" or light equipment transporter, if a Cat D7 can be called light. That is what is mainly transported in engineer units.
 

Artisan

Well-known member
2,761
227
63
Location
CDA Idaho
Thank U both..

There is probably a list somewhere that someone compiled listing what woill work with what.

Wish I could find it. This is a good start.
 

zebedee

conceptualizer at large
Steel Soldiers Supporter
1,634
741
113
Location
Central NY
The -10 TM (operators manual) for each truck, will state applicable trailers.

eg. TM 9-2320-363-10 for the M915 A2, M916 A1 & 'A2, ...in Characteristics 1-9 it states:

M916A1 & A2 is used for the M172, M870, 60PRS and WD6S semi trailers.
M915A2:- M871, M872 and M1062 semi trailers
 

Artisan

Well-known member
2,761
227
63
Location
CDA Idaho
Thank U Zee!

I have been pouring over the tm's and found
a little info but there are a lot of combinations
that have to be considered.
 

Bighurt

New member
2,347
46
0
Location
Minot, ND
Zee, beat me to it cause i can't log in at work.

However the TM isn't all inclusive, there are most liekly trailers you can tow that aren't listed. There are also caution's against certain trailers
 

11Echo

Well-known member
Steel Soldiers Supporter
2,225
92
48
Location
CT W. R.
The M870A1 is a versatile trailer with a 40 ton payload and not overwidth.

M870A1 .jpg
 

Bighurt

New member
2,347
46
0
Location
Minot, ND
Can't log in at work?
The system at work doesn't allow me to login because of its internal security system. In a given day I see "blocked" in all its forms a dozen or more times, mostly messing around but collage pages, aerospace websites, and even a few DoD sites get blocked. They are so few manned they just block everything and thus have less to watch.

He works for uncle sam.
At the moment...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks