goodguyzy
Active member
- 1,337
- 13
- 38
- Location
- medford oregon
Im assuming that your bob tailing it? Get ready for a bumpy ride. I could make one but won't be for a bit.
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Sorry about the late response. I installed the valve body heater that came with some of the trucks and that fixed it to the point, were it only took about 5 to 10 minutes for it to start working. (about the time to get all the air tanks pumped up)Okay so we had a warm day a bam it works, so what's the fix? We were going to send this truck north and this will be a pain up there.
Matt, I don't get it, did you manhandle the steering wheel w/ the engineIf you turn the front wheels all the way to one side, you can access the U joint grease zerk.
View attachment 521396
Just remember to do this with the engine running or you'll have to clean up a power steering fluid mess like I did.
gpp111 you can shift two gears at a time up to tenth gear said:Just read the thread again and it been awhile. You can skipp as many gears as you want buy pulling up on the shift handel. I can go from 6th to 10th to 14th to 16th by like I said just as you pull it out of one gear lift up on the shift handel.
I had the front wheels off the ground. Without the power steering pump running, I think it builds pressure where it wouldn't normally and that fluid comes out of the filler cap.Matt, I don't get it, did you manhandle the steering wheel w/ the engine
off and did it cause a burp or something ?
But thanx for the tip!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!