M939 Exhaust Mod as in 800 Series.

[99nouns]

Is that fender fiberglass or metal? Might worry if its glass.

Its good ole .125 military grade GI steel...

 

[99nouns]

I know everyone wanted to see the process but finally I am done with this project, I did wrap the part under the fender with 2 layers of Fiberglass Exhaust Wrap and oh boy I am so glad that I did...



Special thanks to Csm Davis and Jakelc15

 

[adamsoffroadperformance]

I like it all but the kicker infront of the mirror. needs to go straight up.

 

[Bandit02]

I see on the 800's the mirror brackets on the passenger side are slightly bent to allow the exhaust pipe up through it. Maybe you can use those to keep it closer to the cab for better visibility. Just a thought.

 

[99nouns]

I like it all but the kicker infront of the mirror. needs to go straight up.

Yes I did that temporary until I get the camper on top, then I will have them go at right angle clearing the box. (See previous posts)

 

[99nouns]

I see on the 800's the mirror brackets on the passenger side are slightly bent to allow the exhaust pipe up through it. Maybe you can use those to keep it closer to the cab for better visibility. Just a thought.

Yes I thought of that before as a concern, suprisingly did not make bit difference the way it is now.

 

[73m819]

I LOVE my straight exhaust, not sure the neighbors do, my wife can hear the m819 when it is pull the hill after crossing the lake about 2 miles away, and when using the crane, the 1000 operating rpm has a nice deep throaty sound.

 

[99nouns]

I am gonna be honest, and it is bit loud, I might get a straight muffler after the box.