mep 803a power at lugs one time

[Walter J Riedel]

I now have no voltage while running on 2and 3 at S5. Drops to zero when held up.

Sent from my BE2028 using Tapatalk

 

[Walter J Riedel]

On S5 5.

Sent from my BE2028 using Tapatalk

 

[Walter J Riedel]

Have it on S5 5 when running.

Sent from my BE2028 using Tapatalk

 

[Walter J Riedel]

TB 5 16 has voltage.

Sent from my BE2028 using Tapatalk

 

[kloppk]

When running with S5 in the center position S5-5sshould have 24 volts on it. When you lift S5 S5-5 should go to 0 volts.
Seems that's what you have working now.

With the set running and you lift and HOLD S5 UP does the Contactor lamp illuminate?
Does it stay illuminated when you release it?

 

[Walter J Riedel]

When running with S5 in the center position S5-5sshould have 24 volts on it. When you lift S5 S5-5 should go to 0 volts.
Seems that's what you have working now.

With the set running and you lift and HOLD S5 UP does the Contactor lamp illuminate?
Does it stay illuminated when you release it?

it does not light up. Contactor does not illuminate. it does on push to test. Just tested S5 per TM and it is good.

 

[Walter J Riedel]

it does not light up. Contactor does not illuminate. it does on push to test. Just tested S5 per TM and it is good.

also do not have 24 volts on S5 2 and 3 when running.

 

[Walter J Riedel]

It's working. Probably J6 connectivity issue. One other issue. Amp meter shows discharge instead of charge. Alternator checks good. 28 volts. Battery's are charging at 14 volts. Thoughts?

Sent from my BE2028 using Tapatalk

 

[Ray70]

Check the ammeter for reversed wires on the backside. Reversed wires makes it read discharging instead of charging.
Should charge at 10A+ and slowly come down to zero within a few minutes.

 

[Guyfang]

How much of a discharge?

 

[Walter J Riedel]

Reversed the wires. Charges up in a few minutes. I wish to thank all of you who helped me. Many thanks.

Sent from my BE2028 using Tapatalk

 

[Ray70]

Good deal! Glad it worked..