jimm1009
Well-known member
- 1,165
- 71
- 48
- Location
- Louisville, KY
I purchased my muffler from NAPA today (and intake elbow).
My muffler box had been opened and was taped shut. The muffler was o.k. (never installed) but there were no directions inside and the box is not marked with directions either. I know that this sounds silly but there is a In and an Out and there is no arrow or indication of IN like most mufflers have stamped on them.
I put mine on so the numbers can be read as installed.
The expanded metal (screen like material) inside is at the bottom in the end as installed.
I hope this is correct but was hoping that somone could clarify this for me.
I drove it about an 1/8 of a mile but won't push it until I know for sure.
Mufflers installed backwards can probably do damage or severly restrict exhaust flow, or so I would think.
Thanks in advance,
Jim
jimm1009@yahoo.com
My muffler box had been opened and was taped shut. The muffler was o.k. (never installed) but there were no directions inside and the box is not marked with directions either. I know that this sounds silly but there is a In and an Out and there is no arrow or indication of IN like most mufflers have stamped on them.
I put mine on so the numbers can be read as installed.
The expanded metal (screen like material) inside is at the bottom in the end as installed.
I hope this is correct but was hoping that somone could clarify this for me.
I drove it about an 1/8 of a mile but won't push it until I know for sure.
Mufflers installed backwards can probably do damage or severly restrict exhaust flow, or so I would think.
Thanks in advance,
Jim
jimm1009@yahoo.com