HummerinTX
New member
- 13
- 0
- 1
- Location
- Denton, TX
I am changing my oil, I started by removing the OEM oil filter housing and went to put on my new Oil Filter adapter and it doesn't look like it is going to work. I'll post some pics. Any ideas? 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Oil Filter Conversion Problem
- Thread starter HummerinTX
- Start date
HummerinTX
New member
- 13
- 0
- 1
- Location
- Denton, TX
It says FL753 on the box. So which bolts do I remove from the plate thats on the truck? All of them on the inside? It looks like some of them go all the way through to the block.
HummerinTX
New member
- 13
- 0
- 1
- Location
- Denton, TX
Yeah it looks like my adapter plate is too thin. It should be thicker like the one in the picture you sent. Thanks for the help. Now off to buy a stock canister filter... 
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
The ones I used were thicker then that. I think that one is for the older Cummins. I will go check for the p/n number you need.
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
Ok, Found some # Baldwin OB-1368 or Hasting KF-26
HummerinTX
New member
- 13
- 0
- 1
- Location
- Denton, TX
Awesome man! I really appreciate that!
HummerinTX
New member
- 13
- 0
- 1
- Location
- Denton, TX
What website is that from? I've Google it and can't find that for sale? Thanks
Products - GFC Performance
Your Source for Wholesale Donaldson, Baldwin, Fleetguard, Mann+Hummel, Racor, Parker -Process, Finite, Hydraulics- GFC, PecoFacet and more
usa.petroil.net
- 2,096
- 646
- 113
- Location
- Orlando, FL
I also used the Baldwin part simp listed. I didn't see it commented on but there are two small gaskets in the kit. One is thinner than the other. After trial fitting it with the thin gasket, I decided to use the thicker one when I installed mine. I have seen people suggest using the thin one but it didn't look right to me.
Rangerinv
New member
- 9
- 0
- 3
- Location
- baytown,tx
what is the part number for the older model
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
I have one of the older models if you want one.
Rangerinv
New member
- 9
- 0
- 3
- Location
- baytown,tx
Absolutely, how much
Last edited:
Rangerinv
New member
- 9
- 0
- 3
- Location
- baytown,tx
for the M818 correct
- 3,222
- 392
- 83
- Location
- Tonopah, AZ
PM sent.
Hi so which one is the correct gasket to use on the NHC250? thicker or thinner? Thanks
which of the smaller gaskets do you use on the NHC250? the thicker one or the thinner one? thanks
- 7,409
- 2,503
- 113
- Location
- Interlachen Fl.
I went with the thin one. If in question you could call Baldwin.
Last edited:
I called baldwin, tech guy randy said use the thinner one on horizontal mount NHC motors. Thanks