papabear
GA Mafia Imperial 1SG
- 13,519
- 2,459
- 113
- Location
- Columbus, Georgia
I'm considering a bobbed M819 with CUCV tires/axles.I am a MOD so I can NOT say my bobber thoughts and how thay are a very small step above a cucv.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Papabear said "I'm getting worried about you"
- Thread starter patracy
- Start date
- 9,604
- 1,493
- 113
- Location
- mid- michigan
From a M1009 so you can get more speed.I'm considering a bobbed M819 with CUCV tires/axles.
- 2,177
- 50
- 0
- Location
- Butler TN.
Thats just wrong!
- 12,195
- 320
- 0
- Location
- gainesville, ga.
The above is a sure sign of advanced senilityI'm considering a bobbed M819 with CUCV tires/axles.
Somebody should be taken out back and shot for that "thing". I mean, if you are gonna bob a truck, at least get it so that it looks right, ie wheel well of the bed centered over the rear wheels.........
I am sure that Andrew can set it right, but still...........
I am sure that Andrew can set it right, but still...........
I'm considering a bobbed M819 with CUCV tires/axles.
PB ya really need to see a Dr....and think about the children before you make a move like that.....the shame they'll experience...
Attachments
Last edited:
- 12,195
- 320
- 0
- Location
- gainesville, ga.
PB wishes
Attachments
- 7,744
- 154
- 63
- Location
- Columbus Georgia
You should just leave it butt arse ugly black - at least you know someone will be talking about you behind your back ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
.
The bobbers that were here we made nicely and they looked great and sounded great when they got the run down to yellow river and back.
Those two fella's must have been the deciding factor to go get it.
.The bobbers that were here we made nicely and they looked great and sounded great when they got the run down to yellow river and back.
Those two fella's must have been the deciding factor to go get it.
nk14zp
Active member
- 2,636
- 17
- 38
- Location
- Columbia Falls Maine
Is that oddshots old truck?
I am a MOD so I can NOT say my bobber thoughts and how thay are a very small step above a cucv.
I like my everyday driver.
It is an easier decision to modify a truck when you have more than one truck.
Attachments
- 14,635
- 4,795
- 113
- Location
- Buchanan, GA
Got the headlights/turns/signals/brake lights working again. Also got the leaking line at the rear passenger wheel taken care of. Me and my oldest son worked on cleaning out the clutch. I sprayed four cans of brake cleaner in there. Started out black as oil, last can was looking like watered down tea. Haven't had a chance to drive it to check the clutch. I had my son push the clutch in and out as I sprayed from the inspection plate.
I'm on call this weekend, so I'll probably tackle moving the axle back then. One brake hose looks a little so-so as well. I'll order some front hoses as well. Probably going to toss the two other wheels on the rear as well to dual it.
I'm on call this weekend, so I'll probably tackle moving the axle back then. One brake hose looks a little so-so as well. I'll order some front hoses as well. Probably going to toss the two other wheels on the rear as well to dual it.
papabear
GA Mafia Imperial 1SG
- 13,519
- 2,459
- 113
- Location
- Columbus, Georgia
I sorta...well kinda...in a way...like that truck
(But you didn't hear that from me...OK??)
The good part is the son getting involved...outstanding!
- 18,539
- 5,824
- 113
Congratz on the new bouncing baby truck!
Glad you mentioned the back axle positioning in your OP.... I kinda though it looked like a little doggie with it's tail tucked so far under him that his butt was trying to pass his chin in a full run!!!
As for disrespecting Bobbers....
I simply remind myself that Circumcision is Biblical
...and as the Rabbi once said, "Oops! I cut it twice and it's still TOO SHORT!"
Glad you mentioned the back axle positioning in your OP.... I kinda though it looked like a little doggie with it's tail tucked so far under him that his butt was trying to pass his chin in a full run!!!
As for disrespecting Bobbers....
I simply remind myself that Circumcision is Biblical
...and as the Rabbi once said, "Oops! I cut it twice and it's still TOO SHORT!"
- 14,635
- 4,795
- 113
- Location
- Buchanan, GA
I sorta...well kinda...in a way...like that truck
(But you didn't hear that from me...OK??)
The good part is the son getting involved...outstanding!
Shhhh, you'll have all the haters on you as well!
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Are you going to put a locker in the rear? I find my bobber needs help in the traction department. I hope to have one in before 12SSGR. Can't wait to go on a trail ride with you! 
- 14,635
- 4,795
- 113
- Location
- Buchanan, GA
I worry about peg legging it as well. Locker will come, just not at the moment.
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Peg legging! Everybody makes fun of the amputee! Even the admin. I can't get a break!
You know I'm kidding right? Just couldn't pass on that one. Too funny!
You know I'm kidding right? Just couldn't pass on that one. Too funny!
- 14,635
- 4,795
- 113
- Location
- Buchanan, GA
Ahh crap, sorry, I have a bad tendency of putting my foot in my mouth.
- 18,539
- 5,824
- 113
INSTRUCTIONS:Ahh crap, sorry, I have a bad tendency of putting my foot in my mouth.
1. Insert FOOT (A) into MOUTH (B).
2. Chew vigorously.
Attachments
hwcurtice
Well-known member
- 1,558
- 35
- 48
- Location
- Moncks Corner, SC
Chappy,
You really know how to rub it in, doncha?
You really know how to rub it in, doncha?