• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rear AC/ heat on 2007 m1151a1

fastmaxx09

New member
3
6
3
Location
South Carolina
I have a a possible issue. My rear AC blower works great on AC. When I switch it to heat, only the front dash blower works. I haven't had to use the heat yet, so my question is , should the rear blower work when I turn on the heat, or is it just for cooling ? I would assume it should work as it does when I use the ac , but it doesn't blow when I switch it to heat .. The front works fine, just not the rear
 

maxpower_365

New member
13
8
3
Location
Spokane, WA
I just bought an M1152 (my first Humvee). The AC doesn't work on it and only the high speed fan works (low speed doesn't seem to do anything). Could someone direct me to the right TM to start diagnosing the issue?
 

Greg841

Member
26
70
13
Location
WI
I had the same fan speed problem on my 1151, ended up being the resistor behind the instrument panel. The part number was 5578307. I've found the parts manuals and diagrams are equally useful as the training manuals, the diagrams let you see what's in every system so you can start to narrow down what may be broken.
 

maxpower_365

New member
13
8
3
Location
Spokane, WA
I had the same fan speed problem on my 1151, ended up being the resistor behind the instrument panel. The part number was 5578307. I've found the parts manuals and diagrams are equally useful as the training manuals, the diagrams let you see what's in every system so you can start to narrow down what may be broken.
Thanks for the info on the resistor. Looks like I can buy one through HPG for $160. Is that the best place to order one?
 

maxpower_365

New member
13
8
3
Location
Spokane, WA
I had the same fan speed problem on my 1151, ended up being the resistor behind the instrument panel. The part number was 5578307. I've found the parts manuals and diagrams are equally useful as the training manuals, the diagrams let you see what's in every system so you can start to narrow down what may be broken.
I finally found the TM with the diagram of where the resistor is. I know you said behind the instrument panel, but a picture is worth a 1,000 words. Thanks again!
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks