- 1,200
- 457
- 83
- Location
- Spartanburg,SC
See post #17 above.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
slant back gas struts
- Thread starter 04mustang
- Start date
Those shocks at Eastern are only half of what you need....there part numbers are lowers only but pic is of an upper.
Upper tube has sticker only
Upper and lower cylinder are different length.
Lower tube slides into upper tube.
Upper tube has sticker only
Upper and lower cylinder are different length.
Lower tube slides into upper tube.
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
Got these from Eastern and they're a little rough. I don't know if they will work but I will give them a shot. These were $50 plus shipping
You only got half...and they look bad.....you should have 2 long, 2 sort shocks, and 4 green tubes...2 of which will slide into the other 2....and if dented...they may not slide in.
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
I'm interested in what you have if they function and look better than these.
Please send me some pics.
Thanks
Last edited:
BLK HMMWV
Well-known member
- 1,577
- 500
- 113
- Location
- Pasadena California
Hey Greg are those the heavy duty ones or the regular ones
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
I'll take them.
Zip code please.
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
90069
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
Yes! Send me a DM with your PayPal info
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
Please send me an update
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
So.... Whats the trick to getting the shock to stay depressed long enough to get it bolted in.
Last edited:
- 4,401
- 4,185
- 113
- Location
- Brentwood, Calif
You don’t compress them, you remove the limiting ropes, attach each lift shock to either top or bottom ball, insert retainer clip, open the hatch to the point it’s standing straight up, insert other end into ball, install clip and your done.
helps to have a helper….
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
Sure would help to have another set of hands. But I'm solo, so I guess I will have to use a rope to tie the roof in a vertical position if I can get it that high in a RELATIVELY safe manner
Action
Well-known member
- 3,576
- 1,558
- 113
- Location
- East Tennessee
Back up against a tree and open it "rumble seat" style.
Gamble
Well-known member
- 405
- 347
- 63
- Location
- Los Angeles, CA
Welp, got one in and it was a serious struggle. Then this happened on the second.
- 7,720
- 19,767
- 113
- Location
- Charlotte NC
.
THAT piece of hardward broken is really scary!
It could be the end of a lot of toys in a ditch...