• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Spindle nut

U

Usmc83

New member
11
1
3
Location
California
Just recently checked spindle nut on my 85 998 1038 . It has the old 4 slot spindle nut. Tab is secure and holds just fine. My question is should I upgrade to 8 slot nut ? If so can I just replace the nut itself or do I need to replace washers and spindle nut washers as well ?
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
I would, there is a reason there is an "upgrade" for that part, I always replace the "washer, key" any time the nut is removed, just too cheap not to.
I just looked and AMG has both the nuts and the tabs listed, under $20 for the pair plus shipping of course, fleabay even cheaper
genuinehumveeparts.com

Genuine Humvee Parts

Genuine Humvee Parts
genuinehumveeparts.com genuinehumveeparts.com
 
Last edited:
U

Usmc83

New member
11
1
3
Location
California
Mogman said:
I would, there is a reason there is an "upgrade" for that part, I always replace the "washer, key" any time the nut is removed, just too cheap not to.
I just looked and AMG has both the nuts and the tabs listed, under $20 for the pair plus shipping of course, fleabay even cheaper
genuinehumveeparts.com

Genuine Humvee Parts

Genuine Humvee Parts
genuinehumveeparts.com genuinehumveeparts.com
Click to expand...
Thank you
 
frank8003

frank8003

In Memorial
In Memorial
6,426
4,985
113
Location
Ft. Lauderdale, Florida
many upgrades are for safety

HECK WHAT DO I know .....................

I would compare.
All the engineering specifications between, one to the other
The world is at your feet

considering .....................the differences
You already got it made









but hen.. I are ikd..
 
Ajax MD

Ajax MD

Well-known member
1,569
1,414
113
Location
Mayo, MD
Usmc83 said:
Just recently checked spindle nut on my 85 998 1038 . It has the old 4 slot spindle nut. Tab is secure and holds just fine. My question is should I upgrade to 8 slot nut ? If so can I just replace the nut itself or do I need to replace washers and spindle nut washers as well ?
Click to expand...
My thought on this is- If you're going to upgrade, upgrade to the absolute safest option. None of the AMG stuff is very good or reusable. Buy this kit from Mod Mafia or one of the other vendors or don't touch it at all.

modmafia.com

BlueHummer Outfitters Locking Spindle Nut Kit (per hub)

We strongly recommend installing these on every Hummer H1/HMMWV. We have them installed on our vehicles that we use in the HumveeLife videos. The factory spindle nuts have been known…
modmafia.com modmafia.com

Yes, it's stupidly expensive but it's the most secure locking method and it's totally reusable. You'll never buy it again unless you booger it up during removal or installation.
 
Mogman

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
Ajax MD said:
My thought on this is- If you're going to upgrade, upgrade to the absolute safest option. None of the AMG stuff is very good or reusable. Buy this kit from Mod Mafia or one of the other vendors or don't touch it at all.

modmafia.com

BlueHummer Outfitters Locking Spindle Nut Kit (per hub)

We strongly recommend installing these on every Hummer H1/HMMWV. We have them installed on our vehicles that we use in the HumveeLife videos. The factory spindle nuts have been known…
modmafia.com modmafia.com

Yes, it's stupidly expensive but it's the most secure locking method and it's totally reusable. You'll never buy it again unless you booger it up during removal or installation.
Click to expand...
You are right that is stupidly expensive,
 
A

Action

Well-known member
3,576
1,558
113
Location
East Tennessee
Isn't the issue from improper installation? Or reuse of old parts. Has anything fell apart that was assembled at the factory?
 
Ajax MD

Ajax MD

Well-known member
1,569
1,414
113
Location
Mayo, MD
Action said:
Isn't the issue from improper installation? Or reuse of old parts. Has anything fell apart that was assembled at the factory?
Click to expand...
My understanding is- "Yes."

The Army had a massive program of rechecking every HMMWV and marking them on the body that they were "checked." This was after factory assembly.
The first tabbed washers only engaged a single finger. The second style engages 2 fingers. The 3rd style is still not reusable.

I really try not to buy too much into aftermarket hype but this is one case where I feel the aftermarket product is markedly superior. You won't catch me putting those "heat sink" portal hub covers on my truck, for example.
 
86humv

86humv

Well-known member
Steel Soldiers Supporter
1,700
501
113
Location
Texas
Those bluehummer kits were once $ 79....What happened ?
 
You must log in or register to reply here.
110,898members
165,318threads
2,326,333posts
1,305online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks