• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Stock wheel with weld-on beadlocks and 395's... thoughts?

J

Jakob

Member
722
5
18
Location
Louisville, KY
My thoughts have been to take the stock wheels, have the rings removed, and weld-on 20" beadlock kits. This would get rid of the troublesome lock ring, widen the mounting area at least an inch so that the tires fit better, and make it easier to change tires. I have known these beadlock kits to be used with success on Jeeps, full size trucks, and all out rock machines. My only concern would be with the weight of our trucks.
Punishers-2T.jpg
 
gringeltaube

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,986
2,522
113
Location
Montevideo/Uruguay
Not sure how you would possibly mount a tire, after the bead-lock flange is welded in place?:?
Keep in mind that the stock Deuce wheels are so-called "tapered base rims"; not semi-drop center- or even well-base rims.


G.
 
Csm Davis

Csm Davis

Well-known member
4,166
393
83
Location
Hattiesburg, Mississippi
gringeltaube said:
Not sure how you would possibly mount a tire, after the bead-lock flange is welded in place?:?
Keep in mind that the stock Deuce wheels are so-called "tapered base rims"; not semi-drop center- or even well-base rims.


G.
Click to expand...
He is talking about a civilian style beadlock which just sandwiches the bead on the outside bead.

sent from my decrepit fingers
 
J

Jakob

Member
722
5
18
Location
Louisville, KY
I might order up one of these sets just to try it out. Unless someone can confirm or deny that they work before I experiment with them.
 
gringeltaube

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,986
2,522
113
Location
Montevideo/Uruguay
Csm Davis said:
He is talking about a civilian style beadlock which just sandwiches the bead on the outside bead.

sent from my decrepit fingers
Click to expand...
Correct, 20" civilian.... two flange pieces, a little over 21-1/2 inches, O.D., and lots of bolts and washers. First ring to be welded-on, 2nd one bolts to the first, clamping/squeezing the outer bead... (Or would this be something completely different from what the rock-crawlers are using?)

Now, if a flange of that size was welded to the stock inner wheel, how would someone be able to get the first (inner) bead of the tire over it? Knowingly, tire beads don't stretch...:-?



G.
 
Csm Davis

Csm Davis

Well-known member
4,166
393
83
Location
Hattiesburg, Mississippi
gringeltaube said:
Correct, 20" civilian.... two flange pieces, a little over 21-1/2 inches, O.D., and lots of bolts and washers. First ring to be welded-on, 2nd one bolts to the first, clamping/squeezing the outer bead... (Or would this be something completely different from what the rock-crawlers are using?)

Now, if a flange of that size was welded to the stock inner wheel, how would someone be able to get the first (inner) bead of the tire over it? Knowingly, tire beads don't stretch...:-?



G.
Click to expand...
Because you don't put whole bead over the edge all at once, you put it on at an angle and only have to get two points to go past 21.5" which just kinda ovals the bead slightly for a second, no biggie.

sent from my decrepit fingers
 
J

Jakob

Member
722
5
18
Location
Louisville, KY
quickfarms said:
One big issue I see is tube tires and tubeless tires have a different cross section in the bead area
Click to expand...
I didn't take that into consideration, good point. Hypothetically, this shouldn't affect the function of the physical bead-lock addition. The hardware itself may need to be longer to compensate for that.
 
gringeltaube

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,986
2,522
113
Location
Montevideo/Uruguay
Csm Davis said:
Because you don't put whole bead over the edge all at once, you put it on at an angle and only have to get two points to go past 21.5" which just kinda ovals the bead slightly for a second, no biggie.

sent from my decrepit fingers
Click to expand...
Sorry Jeff, but I have to disagree here: What you say is only possible with a drop-center wheel/rim; not a stock Deuce rim.

Jakob said:
I might order up one of these sets just to try it out. Unless someone can confirm or deny that they work before I experiment with them.
Click to expand...
Yes, better buy one set and find out by yourself. (I say it won't work but I may be wrong...)
 
jasonjc

jasonjc

Well-known member
5,326
289
83
Location
Gravette Ar.
gringeltaube said:
Sorry Jeff, but I have to disagree here: What you say is only possible with a drop-center wheel/rim; not a stock Deuce rim.


Yes, better buy one set and find out by yourself. (I say it won't work but I may be wrong...)
Click to expand...
I don't think it will go either. It would be like not removing the lock ring.
 
J

Jakob

Member
722
5
18
Location
Louisville, KY
I'll attempt it on one wheel before I get the stuff to do it on EVERY wheel.

Does anyone have a cross section of a Deuce wheel and a drop center wheel?
 
You must log in or register to reply here.
110,879members
165,314threads
2,326,215posts
1,987online users
Top