- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
Well, I got a M750, decided I needed to centralize all my spare parts and MV tools. Got it for $1300. In pretty good shape. Came with some extras! lol.
Behind the front storage shelving, I found 4 cans of Bud, an ancient hot plate, (still works!) an old paper plate, and a frying pan.
One row of inside shelving is gone, and I have gotten most of the center isle lights to work. I can't get any of the 'wing' lights to work, even with new bulbs and condensers. Next step is to pull the lights down and start going around with my multi meter. I did wire it up so all three phases ran off the one, as nothing in it currently is 3 phase.
I started to empty out the easy to find items from my barn and putting them on the shelves. I'm thinking of taking out the right side shelves and finding a work bench to put in there.
This is just the first hours worth of transferring, I may have to leave the other set of shelves at this rate, I've got tons more! I'm trying to put all the electrical general parts in the same place, and vehicle specific (M37, M915, etc) to a single column of shelving, so hopefully the parts will be easier to find.
I did notice that the heaters were removed and the ducts sealed, due to asbestos. They didn't do that good a job though, the elbows weren't even bolted down, and I was digging around in there before I read up on the MWO and saw the plaques. Oh well, I'm going to die eventually anyway...
Behind the front storage shelving, I found 4 cans of Bud, an ancient hot plate, (still works!) an old paper plate, and a frying pan.
One row of inside shelving is gone, and I have gotten most of the center isle lights to work. I can't get any of the 'wing' lights to work, even with new bulbs and condensers. Next step is to pull the lights down and start going around with my multi meter. I did wire it up so all three phases ran off the one, as nothing in it currently is 3 phase.
I started to empty out the easy to find items from my barn and putting them on the shelves. I'm thinking of taking out the right side shelves and finding a work bench to put in there.
This is just the first hours worth of transferring, I may have to leave the other set of shelves at this rate, I've got tons more! I'm trying to put all the electrical general parts in the same place, and vehicle specific (M37, M915, etc) to a single column of shelving, so hopefully the parts will be easier to find.
I did notice that the heaters were removed and the ducts sealed, due to asbestos. They didn't do that good a job though, the elbows weren't even bolted down, and I was digging around in there before I read up on the MWO and saw the plaques. Oh well, I'm going to die eventually anyway...
