Lothar
Well-known member
- 324
- 661
- 93
- Location
- North Arkansas
These bolts are 1/4-20 x 1 1/8" and I believe they are from my th400. I have 3 of them left over after checking and re checking.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
th400 help with bolt identification SOLVED
- Thread starter Lothar
- Start date
- 10,498
- 6,631
- 113
- Location
- Camp Wood/LC, TX
I thought the TH400 was metric?
Lothar
Well-known member
- 324
- 661
- 93
- Location
- North Arkansas
I am beginning to think these bolts are not from the transmission at all but have no idea where else they could be from. I believe the pump bolts you are referring to are pictured. I did not have to open the pump up. But I thank you for trying, I clearly need the help.
Oh if you didn't take the pump apart then it could be the bolts that hold the pump in the case. I got one with those type bolts in it.
Sent from my SM-S906U using Tapatalk
Lothar
Well-known member
- 324
- 661
- 93
- Location
- North Arkansas
Duplicate post
Last edited:
Lothar
Well-known member
- 324
- 661
- 93
- Location
- North Arkansas
Those do look the same but these are 1/4" and there are only 3. I tried to DM @cucvrus but I think his notifications might be off. Thanks again.Oh if you didn't take the pump apart then it could be the bolts that hold the pump in the case. I got one with those type bolts in it.
Sent from my SM-S906U using Tapatalk
Lothar
Well-known member
- 324
- 661
- 93
- Location
- North Arkansas
Although they don't appear to do much, the mystery bolts go in the back of the center support. Thanks all for playing.
Attachments
Haha there it is! You need those! Glad you found it
Sent from my SM-S906U using Tapatalk