-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Water leak
- Thread starter Chevykev
- Start date
Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
I have the same leak in one of mine.
Keith_J
Well-known member
- 3,657
- 1,323
- 113
- Location
- Schertz TX
Cowl plenum drain is plugged. Pull wiper arms so the cowl grill can be pulled. There is a plastic screen to keep leaves out, dust gets by.
nyoffroad
Well-known member
- 942
- 690
- 93
- Location
- Rochester NY
Yup, clean all that crap out of there, it goes down behind the fender and the drain hole is there and plugged.
I have cleaned up everything (cowl, screens, drains, etc) mentioned above on my 1009 and I still get water from those vents. That's why most of us have bare floors. It's a CUCV, so don't expect it to be water tight.
That said, you can replace the seals (LMC) around those fresh air vents and it should help a bit. It is on my list of things to do.
That said, you can replace the seals (LMC) around those fresh air vents and it should help a bit. It is on my list of things to do.
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
I agree. Vent seals. That cowl area is a real dirt trap. If you remove the 2-rear hood hinge bolts, you can tee pee the hood forward and remove the cowl screen and the plastic cowl screen. While you are in there, I would remove the wiper transmission linkage and clean lube and paint them parts as well. Flush that cowl screen area out really well and make sure you have good water flow out the bottom cab drains. They may be clogged shut. After you feel you have it clean remove the inner cowl vents and check them for cleaning and reseal them. Even make some seals if you need to. They are not head gaskets or anything special. Good Luck. Maybe even some caulking would work. But like mentioned and CUCV is not a watertight vehicle. It is bound to leak somewhere.