Another Ahab
Well-known member
- 17,991
- 4,536
- 113
- Location
- Alexandria, VA
Yeah, that sure doesn't look good. Ouch. Me too, sorry you ran into THAT nightmare.Oh wow, what a mess! I'm sorry
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
The King Machine
Active member
- 396
- 92
- 28
- Location
- Vancouver, British Columbia
HEMTT or MRAP rims. I ran the same tires on my stock rims for about a year. The tires will also hit the shock mounts if turned the opposite direction. If they contact the sharp corner of the shock mounts the tire is toast. Adjust the steering stops, you will need longer bolts.
Then upgrade the rims later on, you will gain a lot of turning room and ditch the tubes.
I would say you lost more than 10%
Last edited:
TsgtB
New member
- 478
- 3
- 0
- Location
- Granbury, Tx
Having a no start kind of week...
after installing my muffler and flapper, and an in tank Parker pump,
She just doesnt want to start.
Tried some starting spray, pulled off the shut off cover and it looks new (the motor has 50 miles on it)
the shut off rod moves in and out as it should with no binding and smooth.
Tried to get the center button cover off the HH, but it wont budge, sprayed it with PB and charging the
batteries back up..... *FRUSTRATED AS CAN BE.
after installing my muffler and flapper, and an in tank Parker pump,
She just doesnt want to start.
Tried some starting spray, pulled off the shut off cover and it looks new (the motor has 50 miles on it)
the shut off rod moves in and out as it should with no binding and smooth.
Tried to get the center button cover off the HH, but it wont budge, sprayed it with PB and charging the
batteries back up..... *FRUSTRATED AS CAN BE.
machinist75
Member
- 777
- 7
- 18
- Location
- Murphy, TEXAS
Meir you bleed the fuel lines after you replaced the in tank pump?Having a no start kind of week...
after installing my muffler and flapper, and an in tank Parker pump,
She just doesnt want to start.
Tried some starting spray, pulled off the shut off cover and it looks new (the motor has 50 miles on it)
the shut off rod moves in and out as it should with no binding and smooth.
Tried to get the center button cover off the HH, but it wont budge, sprayed it with PB and charging the
batteries back up..... *FRUSTRATED AS CAN BE.
- 327
- 51
- 28
- Location
- Bakersfield, CA
That's what I was gonna say
TsgtB
New member
- 478
- 3
- 0
- Location
- Granbury, Tx
Yes, it was bled, no bubbles, good pressure....
HanksDeuce
Well-known member
- 1,081
- 242
- 63
- Location
- Prairieville, LA
Sorry for your troubles. Glad you had another axle to swap in there.
[SARCASM] Me and the other bobbed deuce owners don't seem to have that rear axle binding problem.
[/SARCASM]ollied
New member
- 224
- 0
- 0
- Location
- Mt. Airy Md. 21771
Have same trouble with my 6 wheel xm408 lucky only wears tires so far .but a blast to drive.
Davetheplumber
"Moose"
- 44
- 6
- 8
- Location
- Corbett, OR
Time to start building a roof
Was the engine running before the fuel pump replacement? Fortunately there's not a lot to these, if the fuel's getting to the cylinders at the right time and the starter is turning the motor over, you generally have a running engine. Good luck!Having a no start kind of week...
after installing my muffler and flapper, and an in tank Parker pump,
She just doesnt want to start.
Tried some starting spray, pulled off the shut off cover and it looks new (the motor has 50 miles on it)
the shut off rod moves in and out as it should with no binding and smooth.
Tried to get the center button cover off the HH, but it wont budge, sprayed it with PB and charging the
batteries back up..... *FRUSTRATED AS CAN BE.
dslucas
Member
- 102
- 1
- 16
- Location
- Deputy Indiana
Installed new front shoes for the deuce, and finally installed the spare.
Also hooked up the front camera to go with my backup camera.
TGP (IL)
Active member
- 512
- 35
- 28
- Location
- Metro East IL
Nice!!!
Looks Great.
Tom
Looks Great.
Tom
Another Ahab
Well-known member
- 17,991
- 4,536
- 113
- Location
- Alexandria, VA
Agreed. That's a great looking truck.
JMPM35A2
Member
- 36
- 0
- 6
- Location
- Amelia, Va
I got my new batteries in and also figured out why I didn't have my air assist steering. The exhaust ports on the air torque valve (I think that what the TM calls it) were plugged up with dirt from a bug. Cleaned them out and air assist steering is now operational again. Also scored a bunch of TMs from a old friend of mine.
Another Ahab
Well-known member
- 17,991
- 4,536
- 113
- Location
- Alexandria, VA
Did he give up on HIS deuce, and that's why he passed on the TM's?
JMPM35A2
Member
- 36
- 0
- 6
- Location
- Amelia, Va
He use to buy em rebuild em and fix them for people for years. He used to be in the service way back when as a mechanic. He was just getting a little older and stopped messing with them all together. He also gave me two trailers, inflator gauge that hooks to the truck and a good spare tire and wheel. Im going to get the trailers this weekend. One is a standard deuce trailer and the other is one where the front folds down like a tail gate.
TsgtB
New member
- 478
- 3
- 0
- Location
- Granbury, Tx
I learned how to take off a HH, from my old motor....
I also pulled the IP, oil cooler and fuel rack, and water pump.
I still have to pull the starter and alternator, and see if i can get it where i can
pull the oil pump. (basically anything that bolts to the block..)
I also pulled the IP, oil cooler and fuel rack, and water pump.
I still have to pull the starter and alternator, and see if i can get it where i can
pull the oil pump. (basically anything that bolts to the block..)
Another Ahab
Well-known member
- 17,991
- 4,536
- 113
- Location
- Alexandria, VA
Yee-HAW; now THAT'S a haul. You made out like a bandit!
It sure is nice to have the right kinds of friends in the right kinds of places.
drivebymashing
Active member
- 754
- 51
- 28
- Location
- North Carolina
Found a neat idea i thought I would try. Paint it green. Would be perfect for deuce.
RaggedyMan
New member
- 89
- 6
- 0
- Location
- Lynchburg Va
Did the same just yesterday, while I was there I bought hearing protectors for any passenger I might have and painted them green too (can't have my rider sporting red protectors).
And while I'm in this thread........I installed a "C" turbo today. I have read where some say they are just to annoying but I didn't think it was that bad, of course those years of loud music and 10's of thousands of rounds I've shot often w/o protection may be the reason.