Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
I dunno that I would trust them about that. I'd ask for it back and tear into it. You probably just lost the button from the bottom of the plunger.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
This might be a better picture of what did the damage hanever would have thought a little bush could cause such harm. The wife thought it was pretty amusing. View attachment 687212
Sent from my SM-G935T using Tapatalk
Its a good thing the tailgate took the brunt of the dammage, it could have been your head! (might have knocked some sense into you)
Anyhoo. it doesn't look too bad, I bet we can fix it.
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
Sounds like you watched the movie "Doc Hollywood" . Yeah, we can fix it !
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Sad about the damage but I think I saw on SS that anNope... at least not untill it has a little motivation from a sledge. Safe to say I'm the market for a new tailgate possibility for a new dropside bed for a good deal.....
aluminum drop sides LMTV bed fits and is cheaper?
fowlhillbilly
New member
- 8
- 0
- 1
- Location
- North Jackson, Ohio
It's back in the Truck and running. I'm not sure if that matters?
Sent from my iPhone using Tapatalk
Akicita
New member
- 296
- 3
- 0
- Location
- Eastern Pennsylvania
Maybe you can convince the guy at the scrap yard to press the bent gate back into shape. Since the damage seems to be limited to that one "dent", it seems possible that a large press that can crunch a car can "iron out" that little crinkle.
I don't think the empty truck is heavy enough to straighten out the gate if you drove over it. That's the method I used to reduce the height of a wood pile (loose, not neatly stacked firewood) by about 80%.
Good luck !
I don't think the empty truck is heavy enough to straighten out the gate if you drove over it. That's the method I used to reduce the height of a wood pile (loose, not neatly stacked firewood) by about 80%.
Good luck !
Akicita
New member
- 296
- 3
- 0
- Location
- Eastern Pennsylvania
Is that a good idea?
I don't like to crawl under the truck either, particularly in snow, but I thought the point of draining the tanks was to let the escaping air blow out moisture that had accumulated in the tanks. I assume your automatic valves release excess air pressure just like on a modern big rig. That won't get rid of all the water that comes out of my tanks when I open the valves by hand. What we really need is an air drier.
Do you have four tanks on your truck? I see four auto-valves. I have only two air tanks.
Questions, questions, wandering minds want to know.
texas30cal
Active member
- 484
- 87
- 28
- Location
- Brenham Tx.
There are also manual valves with a cable attached so you can pull without getting under the truck. But being that far north you may need the heated valves.
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
The LMTV will fit our deuce ? If that is true then I wonder how much weight savings you could get going that route ?
- 454
- 70
- 28
- Location
- cincinnati/OH
it looks to be around 2800 lbs I think. I bet someone will chime in to correct me ha...
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Is that the weight savings (the differential), or is that the weight of the LMTV bed?
The weight that GL had, said 2600# and there is 100# of wood attached. I'm not sure it weighs that much, it lifted rather easily.
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
How much does the steel bed of a deuce weigh then ? Anyone know ?
- 2,664
- 2,203
- 113
- Location
- Sunman Indiana
Not an answer, but maybe a clue. 14' 5ton drop side bed weighs #2000 +-25. Just the bed, lights and wiring, with mud flaps and hangers removed.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 2,664
- 2,203
- 113
- Location
- Sunman Indiana
Wouldn't be at all surprised if LMTV be was heavier than the deuce, there is some serious structure under those new beds.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
kml9705
Member
- 78
- 0
- 6
- Location
- Andover, NJ
These valves let the moisture out, they are also heated with their own thermostat so that the moisture does not freeze in the winter. I still need to wire up the heater.s The idea of these is that they let the moisture out when it builds up instead of having to crawl under the truck to do it. It is all automatic and are used by modern big trucks. Just two tanks, pictures are from different angles.
I have that exact same dent in my bobbed deuce, from doing that exact same thing. My 'solution' plans have ranged from driving over it to welding a chain to it and pulling it out. Interested to hear the route you end up going with.I was helping a friend with a tree problem today and was happy to say I was able to help.... that is of course after my deuce paid the price
Sent from my SM-G935T using Tapatalk
Conversely, if anyone in NorCal is selling an M105 tailgate, PM me
- 454
- 70
- 28
- Location
- cincinnati/OH
I'll just take the approach of looking for a new tailgate and have this one as back up. But it seems they are not as plentiful as they once were around here..I have that exact same dent in my bobbed deuce, from doing that exact same thing. My 'solution' plans have ranged from driving over it to welding a chain to it and pulling it out. Interested to hear the route you end up going with.
Conversely, if anyone in NorCal is selling an M105 tailgate, PM me
Sent from my SM-G935T using Tapatalk