Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your trailer today.
- Thread starter Floridianson
- Start date
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
it's kind of a toss up as to whether to paint it at this point.
One of the local guys might be able to acquire me a cover for it in tan, in which case I'll likely just leave it tan. If I get one in green/camo, then it will get painted.
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
With the military the way is is today - it isn't unusual to see the Marine Reserve here off North Tryon or the Army 108th Tng unit in their convoys with Camo, Green and Tan trucks. Both groups have a "hodge podge" of tan rims on green trucks and covers that don't match the truck by color either. They are a motley crew to say it nicely. It isn't just the army or the marines that are that way as best I can tell.
You would fit right in with them!
JW7tonWY
Active member
- 104
- 144
- 43
- Location
- Central Wyoming
August 2021 I finally painted my trailer to go with the truck. before pic below.
JW7tonWY
Active member
- 104
- 144
- 43
- Location
- Central Wyoming
My new project, so we can take the Jeep along when we take the big truck.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
An excellent paint job!!
- 573
- 1,284
- 93
- Location
- Chesterfield, Mi.
Build a box on that trailer and you’ll have a place to store your 715 and 101… A mobile garage.
JW7tonWY
Active member
- 104
- 144
- 43
- Location
- Central Wyoming
Planning on adding fuel and water tanks so we can go further with both trucks, when the big one gets its camper.
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
What CD fell out? Is it an IETM?
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
I believe it is the tm on a cd.
Ft. Polk had 100's surplused in a few sales in the gl days. Almost all literally new. Sold in sales with 30-40 lots so prices were very reasonable. Wish I had bought a bunch and stored them away.....
They had a tm and cd in the gas can holder in a plastic bag.
Ft. Polk had 100's surplused in a few sales in the gl days. Almost all literally new. Sold in sales with 30-40 lots so prices were very reasonable. Wish I had bought a bunch and stored them away.....
They had a tm and cd in the gas can holder in a plastic bag.
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
Coug,
Can you post a pic of the CD? ?
Can you post a pic of the CD? ?
Last edited:
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
I did not buy any as I had a bunch of m101's and prefer them for my needs.
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's a nice score, there! Excellent.
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Used my brush hog to move trailer around.
Spur of the moment move since I was driving by it with tractor.
This one I leave sitting on the North acreage.
I still don’t know exactly what to do with it so I just move it around every few weeks.
Spur of the moment move since I was driving by it with tractor.
This one I leave sitting on the North acreage.
I still don’t know exactly what to do with it so I just move it around every few weeks.
Attachments
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
So update for my trailer.
My buddy scored me a green cover for the trailer, so I will end up painting the trailer green. I still have part of a gallon of RAPCO paint from doing the truck 2 years ago, hopefully it's still good enough. If not I have a newer case of their rattle cans.
I finally managed to get a State Patrol inspection on it. My state shut down dozens of inspection sites but to "covid manpower shortages" or whatever. Their computer system updates between midnight and 2am, and after almost a month of trying I managed to get an appointment.
Left an hour early, and showed up 15 minutes early because they were doing road work and shutting down the entire interstate for 15-30 minutes at a time. Inspection took all of 10 minutes and I was good to go.
Licensing office's only snag was they asked for a scale weight on it. I told them the manual said about 1500, and they went with that as close enough. Got multiple compliments on the trailer sitting in front of their office (a mailbox/shipping/disc golf store) in a strip mall, and nobody complained that I was taking up 4 parking spots.
Mounted the license plate on the tailgate for now using a couple rivnuts. I'll end up moving it later to underneath by the 3 center marker lights when I get around to wiring up a license place light. They gave me a small plate so it's not as obnoxious as a large one to deal with.
My buddy scored me a green cover for the trailer, so I will end up painting the trailer green. I still have part of a gallon of RAPCO paint from doing the truck 2 years ago, hopefully it's still good enough. If not I have a newer case of their rattle cans.
I finally managed to get a State Patrol inspection on it. My state shut down dozens of inspection sites but to "covid manpower shortages" or whatever. Their computer system updates between midnight and 2am, and after almost a month of trying I managed to get an appointment.
Left an hour early, and showed up 15 minutes early because they were doing road work and shutting down the entire interstate for 15-30 minutes at a time. Inspection took all of 10 minutes and I was good to go.
Licensing office's only snag was they asked for a scale weight on it. I told them the manual said about 1500, and they went with that as close enough. Got multiple compliments on the trailer sitting in front of their office (a mailbox/shipping/disc golf store) in a strip mall, and nobody complained that I was taking up 4 parking spots.
Mounted the license plate on the tailgate for now using a couple rivnuts. I'll end up moving it later to underneath by the 3 center marker lights when I get around to wiring up a license place light. They gave me a small plate so it's not as obnoxious as a large one to deal with.
- 1,505
- 1,676
- 113
- Location
- Puget Sound, WA
I just realized you're in WA.
I registered mine at one of the local strip-mall licensing centers and they never even asked about an inspection. I walked in, paid the $, and walked out with a small license plate.
Years later it still doesn't have a light on the plate.
Also, ask your buddy if he can get another cover.
- 2,974
- 4,355
- 113
- Location
- Olympia/WA
pretty sure he can't. This ons happened to be sitting in a rotting cardboard box next to the trailer it was supposed to be installed on in the motor pool for a couple of years.
Yup, I'm in Washington, down near Oly.
are you on the PNW SS facebook group?